Kappa-carbide

Edit links
From Wikipedia, the free encyclopedia

κ-Carbides are a special class of carbide structures. They are most known for appearing in steels containing manganese and aluminium where they have the molecular formula (Fe,Mn)
3AlC.[1]

Properties[edit]

Structure[edit]

Typical κ-carbide structure with Fe (red), Al (metallic) and C (black)

κ-Carbides crystallise in the perovskite structure type with the space group Pm3m (Nr. 221).[2] This structure was, inter alia, elucidated with XRD-measurements on steel alloys containing κ-carbide precipitates but also on single crystals of manganese-κ-carbides with a molecular formula of Mn3.1Al0.9C and a lattice parameter of a=3.87Å.[3] In steel alloys where diverse arrangements of the atoms are possible, a considerable effect of the short range ordering, e.g. of iron and manganese on the microscopic properties of the alloy, has been observed.[4] This is especially important for the role as hydrogen-traps in steels.[5]

Composition[edit]

A first glance at the composition of a steel alloy is achieved by analysing its surface with EDX-technique.[3]

Depending on the content of the alloying elements of the steel, different types of κ-carbides can form. They occur in both ferritic (α-Fe) and austenitic (γ-Fe) steels.[1] Typical alloying elements are iron, manganese, aluminium, carbon, and silicon.[2][6]

Iron carbon phase diagram

Magnetism[edit]

SQUID measurements on polycrystalline Mn3.1Al0.9C revealed a soft ferromagnetic behaviour of this κ-carbide with a Curie temperature of 295±13 K, a remanent magnetic moment of 3.22 μB and a coercive field of 1.9 mT.[3] DFT-simulations confirmed these findings and indicated that other κ-carbides behave similarly.[7]

Occurrence[edit]

Fe3AlC κ-carbide with interstitial sites that can be occupied by H atoms

κ-carbides are typically found as precipitates in high-performance steels.[8] A common example is the TRIPLEX steel with the generic composition FexMnyAlzC containing 18-28 % manganese, 9-12 % aluminium and 0.7-1.2 % carbon (in mass %).[9] It is a high-strength, low-density steel consisting of austenitic γ–Fe(Mn,Al,C) solid solution, nano size κ-carbides (Fe,Mn)
3AlC
1-x and α–Fe(Al,Mn) ferrite.[9] Other similar steels are known for their high ductility.[4] κ-carbides are usually formed from areas enriched in carbon through spinodal decomposition and are key determinants of the properties of these steels.[10] The low density is e.g. obtained after a hot rolling post-process.[1] Upon cooling, different domains of austenite and ferrite are formed and κ-carbides form at the boundaries of these domains.[11] Continuing the cooling process leads to a phase transition of austenite to ferrite and the κ-carbides are released as a result of an eutectoid transformation in form of a precipitate.[11]

The κ-carbides can have an additional strengthening effect on steels[5] because they can function as a hydrogen trap to counteract hydrogen embrittlement.[3] Ab-initio DFT-simulations have shown that hydrogen can occupy the same site as carbon in the κ-carbide precipitates or an initially empty interstitial lattice site. Hereby, it was found that an increased Mn content enhances the H-trapping by attractive short-range interactions. The aforementioned short-range ordering of Fe and Mn in the κ-carbide has a significant influence on the strength of this effect.[5] This behaviour can be used as an additional method to cope with hydrogen embrittlement which is normally prevented by simply minimising the contact of metal and hydrogen.[4]

See also[edit]

References[edit]

  1. ^ a b c Sozańska-Jędrasik, Liwia; Mazurkiewicz, Janusz; Matus, Krzysztof; Borek, Wojciech (6 February 2020). "Structure of Fe-Mn-Al-C Steels after Gleeble Simulations and Hot-Rolling". Materials. 13 (3): 739. Bibcode:2020Mate...13..739S. doi:10.3390/ma13030739. PMC 7041428. PMID 32041206.
  2. ^ a b Seol, Jae Bok (28 December 2018). "A Brief Review of κ-Carbide in Fe-Mn-Al-C Model Alloys". Applied Microscopy. 48 (4): 117–121. doi:10.9729/am.2018.48.4.117.
  3. ^ a b c d Dierkes, Hannes; van Leusen, Jan; Bogdanovski, Dimitri; Dronskowski, Richard (17 January 2017). "Synthesis, Crystal Structure, Magnetic Properties, and Stability of the Manganese-Rich "Mn3AlC" κ Phase". Inorganic Chemistry. 56 (3): 1045–1048. doi:10.1021/acs.inorgchem.6b02816. PMID 28094520.
  4. ^ a b c Song, Wenwen; Bogdanovski, Dimitri; Yildiz, Ahmet; Houston, Judith; Dronskowski, Richard; Bleck, Wolfgang (10 January 2018). "On the Mn–C Short-Range Ordering in a High-Strength High-Ductility Steel: Small Angle Neutron Scattering and Ab Initio Investigation". Metals. 8 (1): 44. doi:10.3390/met8010044.
  5. ^ a b c Timmerscheidt, Tobias; Dey, Poulumi; Bogdanovski, Dimitri; von Appen, Jörg; Hickel, Tilmann; Neugebauer, Jörg; Dronskowski, Richard (11 July 2017). "The Role of κ-Carbides as Hydrogen Traps in High-Mn Steels". Metals. 7 (7): 264. doi:10.3390/met7070264.
  6. ^ Bartlett, Laura N.; Van Aken, David C.; Medvedeva, Julia; Isheim, Dieter; Medvedeva, Nadezhda I.; Song, Kai (20 February 2014). "An Atom Probe Study of Kappa Carbide Precipitation and the Effect of Silicon Addition". Metallurgical and Materials Transactions A. 45 (5): 2421–2435. Bibcode:2014MMTA...45.2421B. doi:10.1007/s11661-014-2187-3.
  7. ^ Seo, Seung-Wo. "First Principles Calculations on Thermodynamic Properties and Magnetism of k-carbide and Monte-Carlo Cell Gas Model" (PDF). Retrieved 14 July 2020.
  8. ^ Gutierrez-Urrutia, I.; Raabe, D. (March 2013). "Influence of Al content and precipitation state on the mechanical behavior of austenitic high-Mn low-density steels". Scripta Materialia. 68 (6): 343–347. doi:10.1016/j.scriptamat.2012.08.038.
  9. ^ a b Frommeyer, Georg; Brüx, Udo (September 2006). "Microstructures and Mechanical Properties of High-Strength Fe-Mn-Al-C Light-Weight TRIPLEX Steels". Steel Research International. 77 (9–10): 627–633. doi:10.1002/srin.200606440.
  10. ^ Rana, Radhakanta; Lahaye, Chris; Ray, Ranjit Kumar (29 August 2014). "Overview of Lightweight Ferrous Materials: Strategies and Promises". JOM. 66 (9): 1734–1746. Bibcode:2014JOM....66i1734R. doi:10.1007/s11837-014-1126-5.
  11. ^ a b Akdeniz, M. Vedat (26 August 2008). "Solidification Microstructures and Carbides Morphology in Rapidly Solidified Fe-Al-Cr-C Alloys". Metals and Materials International. 14 (4): 397–402. Bibcode:2008MMI....14..397A. doi:10.3365/met.mat.2008.08.397. S2CID 121181321.

External links[edit]

  • [1] κ Carbide in Steels] (Phase Transformations & Complex

Properties Research Group, University of Cambridge)

Retrieved from "https://en.wikipedia.org/w/index.php?title=Kappa-carbide&oldid=1214844289"