Wikipedia:WikiProject U.S. Roads/Shields task force/Requests/Archive 2

Texas State Highway Spur 527/Texas FM 1764

Need these for Houston area freeways template.

Perimeter285 22:13, 5 November 2007 (UTC)

I'll make the shields, but you shouldn't be using them in templates like that, makes them way too big. --Holderca1 ^talk 14:32, 6 November 2007 (UTC)

Done --Holderca1 ^talk 21:50, 15 November 2007 (UTC)

Minnesota Highway 371 - Business

I've been doing some work on Minnesota Highway 371 creating an intersection list, and I noticed that it doesn't seem like there has been a shield for Minnesota Highway 371 - Business made.

MN 371-Business is the old route MN 371 into Brainerd and remains as part of the state trunk highway system, therefore a shield probably should be made for it.

A page hasn't yet been made for 371-Business (I'll probably get at least a stub put up soon), but it will be as follows: Minnesota_State_Highway_371_Business

As for what the shield looks like, it uses a different color scheme than the regular Minnesota Highway shields, this link has pictures that show some of them up close:

http://ajfroggie.com/roadpics/mn-ends/bus371.htm

Thanks SpaceJunkie (talk) 06:18, 17 November 2007 (UTC)

Accepted --Ltljltlj (talk) 15:01, 17 November 2007 (UTC)

Complete --Ltljltlj (talk) 15:01, 17 November 2007 (UTC)

Thank you for the new shield! I was made aware that business routes aren't supposed to get separate articles, but this new image is perfect for the section on the Business Highway in the Minnesota State Highway 371 article and for the major intersections table I had created. SpaceJunkie (talk) 21:38, 17 November 2007 (UTC)

Stearns County, Minnesota

Now that I got Inkscape and the Roadgeek fonts installed, I decided I can best make shields that I wanted, therefore I deleted my previous request.

Thanks, SpaceJunkie (talk) 00:34, 21 November 2007 (UTC)

Random Florida County Road shields

Here's a short list of shield request for random articles and lists related to County Roads in Florida.

• Broward CR 858, for Interstate 75 in Florida
• Lake CR 474, for the page it's on, and for the List of county roads in Lake County, Florida.
• Manatee CR 39 & Clay CR 315, currently for the Florida CR completion list.
• Dixie CR 349, for U.S. Route 27 Alternate (Florida)

These are just the ones I know of that need them for now. ----DanTD 21:11, 13 November 2007 (UTC)

One more; Gilchrist County Road 313, for County Road 313 (Gilchrist County, Florida). ----DanTD 21:14, 13 November 2007 (UTC)

Accept --Holderca1 ^talk 21:51, 15 November 2007 (UTC)

Thanks for working on it. I just remembered another one; Marion CR 335, for County Road 335 (Levy County, Florida). I really should add it to the Marion CR list too. ----DanTD (talk) 04:50, 19 November 2007 (UTC)

Complete I think I got them all, let me know if I missed one. --Holderca1 ^talk 16:17, 5 December 2007 (UTC)

I believe you got them all. I suppose I'm going to have to work on more Florida County Route lists after this. ----DanTD (talk) 18:13, 8 December 2007 (UTC)

What about these shields?

Shields we need I remeber asking it earlier:

• 
• 
• 

--Freewayguy--Comm 90 20:54, 8 November 2007 (UTC)

Don't make duplicate requests and be patient. Some have waited for months for shields on this page; your request has barely been active for two weeks. --TMF ^{Let's Go Mets - Stats} 21:07, 8 November 2007 (UTC)

Why can't you use Image:US_DOT_FHWA_MUTCD_SHS_2004_3-1_M1-1_750x600mm_678_NY.svg to make it yourself? —Scott5114↗ 21:27, 8 November 2007 (UTC)

They go in infobox and infobox has to use I-# (NY).svg for all routes --Freewayguy--Comm 90 23:45, 8 November 2007 (UTC)

Either make the darn shields yourself, or be patient. --Rschen7754 (T C) 00:29, 9 November 2007 (UTC)

Uh, yeah, you use the shield I linked to as a template to create the new shields you want. Takes all of about a minute for each shield. —Scott5114↗ 01:29, 9 November 2007 (UTC)

You can also override the shield parameter in {{infobox road}} by putting something in the shield parameter. --Holderca1 ^talk 13:36, 9 November 2007 (UTC)

What's wrong with ? It's not like any signs are posted, so there's nothing to match. --NE2 11:21, 9 November 2007 (UTC)

Complete Anyway, the shields are made and it took longer to argue than it would have to make the shields. It took 2 months to get 3 shields which take 5 minutes to make!! Carpetmaster101 03:40, 16 December 2007 (UTC) —Preceding unsigned comment added by Carpetmaster101 (talk • contribs)

Bike Route Shields

I have created many articles about bicycle routes recently and would like to request some new shields. I would like a shield similar to Image:US_Bike_13_Alternate.svg for Delaware Bicycle Route 1. I would also like to request shields for the BicyclePA Routes:A, E, G, J, L, S, V, Y, and Z. Here is a link to a page that has pictures of what the BicyclePA Route Shields look like [1]. Dough4872 18:45, 29 August 2007 (UTC)

complete 1 year on wikipedia Check your talk page Carpetmaster 101 (talk) 02:39, 17 December 2007 (UTC)

Alaska sheilds

• 
• 
• 

--Freewayguy (Meet) 23:00, 29 December 2007 (UTC)

- see commons:Category:Interstate_Highway_shields we already have them  — master son^{T - C} 23:05, 29 December 2007 (UTC)

Not that they should ever be used... not a single one of those is present on an Alaska roadway. Although it's nice to know they're there. —Rob (talk) 02:09, 30 December 2007 (UTC)

No doubt.  — master son^{T - C} 01:47, 1 January 2008 (UTC)

NM Shields for Interstate 25 in New Mexico

Okay, I'm starting my list of requests for shields within the Exit List of Interstate 25 in New Mexico, and they're all for New Mexico State Routes:

• 320, 157, 140, 546, 187, 152, 195, 181, 408, and 500.

That's my limit of 10. I'll seek more when the others are done. ----DanTD (talk) 03:22, 28 November 2007 (UTC)

Accept Complete Carpetmaster101 Carpetmaster101 04:07, 16 December 2007 (UTC)

Thanks. Now for my next list of 10:

• 45, 50, 63, 65, 165, 283, 315, 329, 518, and 599.

I hope I'll be able to request the rest before the New Year. ----DanTD (talk) 02:50, 17 December 2007 (UTC)

Don't bother requesting for this page, it's done. :) Mr. Matté (talk) 22:03, 10 January 2008 (UTC)

Since I didn't thank you before, let me do it now. In the meantime, I'm afraid I forgot one, but I won't do anything about it now, since Ive got two other requests below on two different days. ----DanTD (talk) 01:45, 14 January 2008 (UTC)

FL shields

I think we should have these FL shields. They can be used in history section just not 25x20 px icons or main display of infobox--Freewayguy (Meet) 23:17, 31 December 2007 (UTC)

• 

Do you have a reliable source (DOT standards for example) that say FL uses state specific Interstate Shields? If not, we cannot provide them.  — master son^{T - C} 01:48, 1 January 2008 (UTC)

I mean to use it on articel body only to replace this. Its okay for diamond shield there, just not okay for infobox or 25x20px icons. --Freewayguy (Meet) 22:43, 1 January 2008 (UTC)

Is this request accepted? Or it is not active for a while, if so just write accept even if is not active for 3 weeks. I'm confused if you just leave it. It can be used in article body just not any routebox or 25x20px icons. --Freewayguy (Meet) 17:12, 4 January 2008 (UTC)

There's absolutely no reason to replace that image with an SVG shield. --TMF ^{Let's Go Mets - Stats} 22:19, 7 January 2008 (UTC)

What's a diamond shield? —Scott5114↗ [EXACT CHANGE ONLY] 18:51, 8 January 2008 (UTC)

Now there is still alot of FL state shield, and ther post out like summer 2006. That because they do not comply to the DOT standard. We dont need to know how old the shield is Why does this matter? Maryland and Georgia is also doing this same thing. The 2000 DOT code told them to use nuetral sheilds. Some post last year still have state names. --Freewayguy (Meet) 21:09, 9 January 2008 (UTC)

So what? That doesn't mean we have to include them on our articles.  — master son^{T - C} 22:18, 9 January 2008 (UTC)

Never mind-dont need it-just delete this pic from article. That's it. I think FL post out at least 5 state shields last year, I don't know what style they use instead of their proper format. Those shields is caught automatic error. Gerorgia promise to not post any more state shield after 1999 but after June 2006 they post out like at least 5 to 10 more state shields. I don't know why would they do that and those is just foul shields.--Freewayguy (Meet) 01:49, 26 January 2008 (UTC)

Mississippi shields

Currently requesting MS 311 & MS 411 for List of highways numbered 311 and List of highways numbered 411 respectivley, and any other article where the shields would show up. ----DanTD (talk) 16:16, 3 January 2008 (UTC)

Come to think of it, they would also be good for Wikipedia:WikiProject U.S. Roads/Redirects/Mississippi too. ----DanTD (talk) 14:47, 4 January 2008 (UTC)

Accepted...done. —Scott5114↗ [EXACT CHANGE ONLY] 18:50, 8 January 2008 (UTC)

Thanks. I think I'm going to keep Mississippi's Redirection List around, just to get more shields added. ----DanTD (talk) 19:07, 8 January 2008 (UTC)

NJ County Route shield

I need Image:Gloucester County Route 631 NJ.svg for the I-295 exit list. Dough4872 (talk) 01:54, 9 January 2008 (UTC)

Done Note, I also have all of Gloucester and Burlington's shields completed, but I'm right now figuring out a way to get them batch uploaded. Mr. Matté (talk) 21:18, 10 January 2008 (UTC)

Thanks Dough4872 (talk) 03:41, 11 January 2008 (UTC)

More Mississippi Shields

This time along Interstate 20 in Mississippi, In fact, I'm requesting shields for MS 481 and MS 503. I'm going to start making more requests about the State Highway shields along all Missisippi Interstates during the month. ----DanTD (talk) 01:08, 14 January 2008 (UTC)

Once again, got all of MS' Interstates' shields up to date. (aka done) Mr. Matté (talk) 02:47, 14 January 2008 (UTC)

Damn, you're good, Mr. Matté. You didn't do the ones for Interstate 59 in Mississippi, but at this rate I suspect you will. Are you sure you weren't doing this before you joined the WikiShieldsProject? ----DanTD (talk) 14:33, 14 January 2008 (UTC)

No, I did do I-59, you may have to purge the page to see them. Actually, I've only been doing this for a week or so; I only recently got Inkscape to work on these, I guess I just learned really quickly. Thanks for the kind words! Mr. Matté (talk) 19:57, 14 January 2008 (UTC)

Pennsylvania Quadrant Route shields

I need the following Pennsylvania quadrant route shields for Harrisburg area articles: . They should be created in a manner similar to Image:PA QR 3015.svg. Dough4872 (talk) 01:00, 15 January 2008 (UTC)

Accepted... Son asked me a week or so ago on IRC to make these, but my laziness has kept me from doing so. =) They'll be done by tomorrow. --TMF ^{Let's Go Mets - Stats} 08:26, 15 January 2008 (UTC)

Finally done --TMF ^{Let's Go Mets - Stats} 20:13, 31 January 2008 (UTC)

Thanks Dough4872 (talk) 00:29, 3 February 2008 (UTC)

South Carolina Road shields

I've been working on the list of SC number highways and have found several SC Highways without shields. Here is what I have so far; 65, 67, 97, 102, 103, 107, 109, 118, 125, 165. Here is an example of the kind I'm talking about, Many thanks, Rocketmaniac (talk) 02:01, 26 January 2008 (UTC)

Accepted, now Complete Mr. Matté (talk) 02:32, 26 January 2008 (UTC)

Awesome!!! thanks. I might have some more in a few days. Later, Rocketmaniac (talk) 02:53, 26 January 2008 (UTC)

I have found some more that are missing when someone is able to get to it. Same series of shields. Numbers 1, 184, 185, 200, 247, 260, 303, 333, 421 and 512. Thanks, Rocketmaniac (talk) 13:45, 26 January 2008 (UTC)

I'm going to accept, but I'll just try and go ahead and do all the missing shields from the List of SC Highways page. Mr. Matté (talk) 14:03, 26 January 2008 (UTC)

And now they should be done. Mr. Matté (talk) 14:31, 26 January 2008 (UTC)

Thanks. There might a couple more needed, but that is 99% of them. There are a couple of US highways listed in the SC section that might need a shield when I change them over to the state type. You've done great work. Rocketmaniac (talk) 14:34, 26 January 2008 (UTC)

It should be noted that SCDOT has introduced a new shield design that will be used for all new/replacement signage, as shown here. There was a SCDOT release about it, but I can't remember the location. In any event, I have an SVG template for the new signage ready to go, but I don't know if we want to give the new signage a new file name or overwrite the old signs. --TMF ^{Let's Go Mets - Stats} 20:04, 31 January 2008 (UTC)

I propose keeping the old style where it is and create new style shields at Image:South Carolina X.svg. --Holderca1 ^talk 21:30, 31 January 2008 (UTC)

I agree with that name.--Ltljltlj (talk) 21:32, 1 February 2008 (UTC)

OK, it's been uploaded as Image:South Carolina X.svg. It probably needs more refinement, but it's a good start. Here's what's tripping me up: the SCDOT release says that the shade of blue on the signs is the same as the shade on their Interstate Highway shields; however, the blue used on the sample SC shield pic and on the real-life pics seem to be much lighter than the MUTCD standard blue. I don't know what to make of that unless (1) the sample SC pic is wrong and the picture colors are off or (2) SC uses a much lighter blue for Interstate Highway shields. --TMF ^{Let's Go Mets - Stats} 00:45, 2 February 2008 (UTC)

More NM shields

I hated to bring this up, but I'm requesting some more shields for New Mexico State Routes 250, 460, 501, 502, and 503. These are mostly for completion lists, although some are for the articles on roads that are covered by them. I've got to work on more states too. ----DanTD (talk) 21:39, 26 January 2008 (UTC)

I guess it's another accept for me! Mr. Matté (talk) 22:35, 26 January 2008 (UTC)

And it's done. Mr. Matté (talk) 22:43, 26 January 2008 (UTC)

I don't see any difference. Keep in mind, I'm not on the same PC that I was on before, so you can't say I didn't clean my cache this time. ----DanTD (talk) 19:14, 29 January 2008 (UTC)

Did you try purging the page? (aka, putting "?action=purge" at the end of the page's URL) —Mr. Matté (^Talk/_Contrib) 20:10, 29 January 2008 (UTC)

Yes, and it took me to "Wikipedia does not have an article with this exact name," and it never let me back. ----DanTD (talk) 23:09, 29 January 2008 (UTC)

It wasn't working for me either. I went and purged the pages for NM 501 and 502, and [2]. They seem to be showing up now. 25or6to4 (talk) 01:14, 30 January 2008 (UTC)

More South Carolina Road shields

Hello again, I've found a bunch more shields that are needed for SC. The first 10 are, 21, 25, 26, 29, 52, 54, 62, 69, 70, 71. Thanks again, Rocketmaniac (talk) 14:38, 27 January 2008 (UTC)

Done with all of them on the List of SC Routes page. —Mr. Matté (^Talk/_Contrib) 16:29, 27 January 2008 (UTC)

NM signs

Since some NM signs were just created, I would like to request a couple more to complete the adjoining Texas articles. Needed are #'s 128, 176, 132, 114, and 421. Thanks. 25or6to4 (talk) 01:34, 30 January 2008 (UTC)

Done! —Mr. Matté (^Talk/_Contrib) 11:30, 30 January 2008 (UTC) (P.S., don't forget to purge the page!)

NJ's missing shields

New Jersey's missing a ton of shields if someone can make them. They are: 445S, 11N, 25AD, S41A, S41N, S44A, S100, S101, 700N and 700P. I'm not sure how well someone can fit 4 digits on a circle shield, but thanks. ^Mitch32^contribs 22:33, 1 February 2008 (UTC)

All of those shields except for S100 and S101 are listed in the elongated shield category with the format: Image:Elongated circle 444S.svg. I'll accept on the other two though and put them in the elongated shield group. —Mr. Matté (^Talk/_Contrib) 23:49, 1 February 2008 (UTC)

They're done and put into the aforementioned group. —Mr. Matté (^Talk/_Contrib) 00:06, 2 February 2008 (UTC)

County Route 9 (Dutchess County, New York)

In a .svg format. Thanks. Juliancolton (talk) 21:26, 2 February 2008 (UTC)

Dutchess CRs 8-10 are done. You're welcome! :) —Mr. Matté (^Talk/_Contrib) 23:28, 3 February 2008 (UTC)

could i have an interstate wide sign made

i would like the wide interstaesign with the route number 1095 and a bussniess route loop sign with 1095

thank you —Preceding unsigned comment added by 69.182.5.188 (talk) 00:55, 10 February 2008 (UTC)

Umm, this interstate doesn't exist, there are no 4-digit interstates. --Holderca1 ^talk 16:04, 11 February 2008 (UTC)

National Park Service Route 615 in Wallpack, NJ

This shows of a National Park Service Route 615, a continuation of County Route 615 in Sussex County, NJ. I could use a shield for the linked article, since I am expanding that.^Mitch32^contribs 21:02, 18 December 2007 (UTC)

This is a start; since I'm not good with determining licensing, I don't know if this could be uploaded as a .svg. I have the .svg version if it is ok. Mr. Matté (talk) 03:56, 26 January 2008 (UTC)

If it is a National Park Road, then it is PD, all works of the US Govt are PD. --Holderca1 ^talk 14:48, 8 February 2008 (UTC)

So then, here's the shield: —Mr. Matté (^Talk/_Contrib) 20:05, 8 February 2008 (UTC)

Still More South Carolina Road shields

I've got another batch of shields that are needed for SC. The first 10 are, 74, 77, 79, 91, 94, 95, 96, 98, 108, and 112. Thanks again, Rocketmaniac ^RT 05:21, 2 February 2008 (UTC)

Note to acceptor: See my note here; SCDOT changed the shield design. I dunno if we want to finish off the old set, or just move on to the new style. Either way, there's a template for the new design on Commons. --TMF ^{Let's Go Mets - Stats} 05:32, 2 February 2008 (UTC)

Perhaps the old design should be kept as a reference. If the new one is official, though, then that's great. ----DanTD (talk) 06:20, 2 February 2008 (UTC)

Just a quick post to ask what direction SC shields needed to be headed? Old or New? In the SC highways up to the 200's, I know of about 30-40 missing shields in the old style. I still haven't gone throught all of the higher numbers to see what is missing. I am finding out that SC has tons of state routes. This is the article that I'm working on, List of numbered highways in South Carolina. Thanks, Rocketmaniac ^RT 13:13, 8 February 2008 (UTC)

Regarding whether to use the old ones or not, I'm going to start making the shields in the new design; whether they should be uploaded; let me know. —Mr. Matté (^Talk/_Contrib) 20:34, 8 February 2008 (UTC)

Oh, definitely upload them, they use different file names anyways. --Holderca1 ^talk 20:38, 8 February 2008 (UTC)

Most new South Carolina shields are DONE. —Mr. Matté (^Talk/_Contrib) 22:25, 8 February 2008 (UTC)

Great. What are you naming these new shields? Thanks, Rocketmaniac ^RT 02:07, 9 February 2008 (UTC)

"South Carolina X.svg" --TMF ^{Let's Go Mets - Stats} 03:33, 9 February 2008 (UTC)

You can see them here: Talk:List of numbered highways in South Carolina/completion list. --Holderca1 ^talk 13:19, 9 February 2008 (UTC)

Wow, that's a long list. While SC has tons of state roads, that list appears to have all number between 1 and 999. I've switched all the existing shields over to the new style. Now I am going back and double checking all the highways and adding the highway numbers that while they aren't currently assigned to a highway, they did at one time exist and have a history. I've just completed highways up to 299 and have found another 30-40 shields that need to be created in the new style. Thanks, Rocketmaniac ^RT 13:33, 9 February 2008 (UTC)

Yeah, see the note at the very top of that page, not all may have existed. --Holderca1 ^talk 16:59, 9 February 2008 (UTC)

TX FM shield template

Would it be possible to get a TX FM shield template? Currently there is a huge library of PNG TX FM images that I'd like to convert to SVG. --Rschen7754 (T C) 21:33, 3 February 2008 (UTC)

Not a template, but my best guess is to create one for yourself (and if possible, upload it to Commons) using the blank FM shield and page 21 of the Texas DOT guide. —Mr. Matté (^Talk/_Contrib) 23:04, 3 February 2008 (UTC)

I have a template that I will upload (actually I have more than one, the numbers are different sizes depending on the number of digits). Yeah, there is about 3,500 different shields with only about 10-20% in svg format. They are a little tedious to make as the number is not centered on the shield, so you have to calculate the correct position each time you make one. --Holderca1 ^talk 21:27, 6 February 2008 (UTC)

• Image:Texas FM XXX.svg
• Image:Texas FM XXXX.svg
• Image:Texas RM XXX.svg
• Image:Texas RM XXXX.svg

Here you go, just center the numbers on 224 and you should be good to go. Let me know if you have any problems. I didn't upload the templates for 1 and 2 digit shields since those are all complete. --Holderca1 ^talk 01:26, 8 February 2008 (UTC)

Thanks. So I could go through commons and tag all the 1-2 digit TX FM PNG shields for deletion? --Rschen7754 (T C) 01:56, 8 February 2008 (UTC)

Just so everyone knows, I've redone the templates so the numbers are already centered. —Mr. Matté (^Talk/_Contrib) 04:05, 8 February 2008 (UTC)

What are you talking about? You have to do it everytime, just like creating any other shield, different numbers have different widths, such as 1111 is not nearly as wide as 3000. --Holderca1 ^talk 11:49, 8 February 2008 (UTC)

Holy crap, I just saw what you actually did. How did you do that? I have manually centered every shield I have ever created, didn't know it could automatically be done. How do you go about doing that? --Holderca1 ^talk 11:59, 8 February 2008 (UTC)

I had thought most of the 1-2 digit png shields had already been deleted, but if not yes. Actually, the completion lists are here: Wikipedia:WikiProject Texas State Highways/Completion list/Farm to Market and Ranch to Market Roads. --Holderca1 ^talk 11:52, 8 February 2008 (UTC)

NJ County Route shields

I need the following shields for NJ CRs:

1. Middlesex CR 644
2. Middlesex CR 646
3. Middlesex CR 648
4. Passaic CR 611

If anyone can, thanks!^Mitch32^contribs 12:01, 8 February 2008 (UTC)

They're done, with a note on the requester's talk page. —Mr. Matté (^Talk/_Contrib) 20:24, 8 February 2008 (UTC)

Nevada State Route shields

For the highways, they're listed for, plus the two main Interstates(15 & 80), and at least one list of highways with the same name, I'm requesting the following shields:

• 490, 578, 582, 589, 591, 592, 593, 668, 766, and 858.

I'm going to start doing these for more Nevada State Highways that cross Interstates in Nevada. ----DanTD (talk) 17:26, 9 February 2008 (UTC)

I'll accept on this; and a done on that. —Mr. Matté (^Talk/_Contrib) 22:40, 9 February 2008 (UTC)

Really? I just checked one of the roads(Nevada State Route 589), and I don't see a shield there. ----DanTD (talk) 23:29, 9 February 2008 (UTC)

UPDATE: I see that some shields exist, but they're only showing up on a few articles. As of now though, I discovered that a Nevada route shield is up for deletion; Image:Nevada 667.svg. Though I understand the reason behind the deletion tag, an adequate replacement would be a good idea. ----DanTD (talk) 03:16, 13 February 2008 (UTC)

There already is one on Commons. When the one on Wikipedia is deleted, the one on Commons will automatically take its place. --TMF ^{Let's Go Mets - Stats} 03:49, 13 February 2008 (UTC)

New Jersey shields

I need the following shields for roads in New Jersey: . I also need a shield for Ocean Drive (New Jersey). A picture of one can be found here. Dough4872 (talk) 16:26, 12 February 2008 (UTC)

All of the county route shields are done. —Mr. Matté (^Talk/_Contrib) 19:29, 12 February 2008 (UTC)

Thanks Dough4872 (talk) 23:28, 13 February 2008 (UTC)

Last of the SC shields

I think this will be my last request for SC shields. I've gone throught all the SC highways and added all of the missing highways. Here is the article I am working on List of numbered highways in South Carolina. The first 10 shields that are missing are; 220, 222, 223, 224, 225, 226, 227, 228, 229 and 230. Many Thanks, Rocketmaniac ^RT 03:06, 14 February 2008 (UTC)

I'll put in an accept on this. They're now done. Whew! :) —Mr. Matté (^Talk/_Contrib) 21:21, 14 February 2008 (UTC)

Thanks. I know SC shields has been a big job, specially since there was a change in style. In the end, job well done. Rocketmaniac ^RT 23:35, 14 February 2008 (UTC)

West Virginia state shields

I dug through this site and try to find a sign drawing (I'm having trouble finding), I'm sure WV still uses normal state shields on interstates in sign drawing. Its better if we have these shields.

• 
• 
• 
• 
• 
• 

--Freewayguy (Meet) 21:19, 15 February 2008 (UTC)

Per page 32 of the document you provided, these shields are already complete: --Holderca1 ^talk 17:13, 16 February 2008 (UTC)

This has the Interstate signs I think you are looking for. --Ltljltlj (talk) 16:17, 17 February 2008 (UTC)

Accept. --Holderca1 ^talk 14:39, 18 February 2008 (UTC)

Complete. --Holderca1 ^talk 14:56, 18 February 2008 (UTC)

{{infobox road}} and {{jct}} both now automatically call the new shields as well. --Holderca1 ^talk 14:59, 18 February 2008 (UTC)

Cape May County Route Shields

I would like to request county route shields for all the county routes on List of county routes in Cape May County, New Jersey that do not already have a shield. Dough4872 (talk) 15:17, 18 February 2008 (UTC)

Could you specify which shields need creating and limit it to 10 at a time. The page that you linked does not state which have shields and which don't. Thanks. --Holderca1 ^talk 15:28, 18 February 2008 (UTC)

I think it should wait until the list is converted correctly.^Mitch32^contribs 15:45, 18 February 2008 (UTC)

I have cleaned up the list and would like to request the first 10 shields for the list:

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Dough4872 (talk) 23:22, 20 February 2008 (UTC)

I'll go ahead and accept on these. — They're now done. —Mr. Matté (^Talk/_Contrib) 03:38, 21 February 2008 (UTC)

Thanks Dough4872 (talk) 23:23, 21 February 2008 (UTC)

Arden Valley Road

Is there any chance I can get an Arden Valley Road shield, like this one for the infobox for that Parkway? ----DanTD (talk) 06:06, 22 February 2008 (UTC)

I'll accept. And now it's done: —Mr. Matté (^Talk/_Contrib) 12:07, 22 February 2008 (UTC)

And you even added the shield yourself. Thanks. ----DanTD (talk) 16:40, 22 February 2008 (UTC)

Cumberland County route shields

I would like to request the first 10 shields for List of county routes in Cumberland County, New Jersey:

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

Dough4872 (talk) 23:01, 25 February 2008 (UTC)

Accepted, should be done by tomorrow morning didn't see that there were that many. All Done now. —Mr. Matté (^Talk/_Contrib) 03:48, 26 February 2008 (UTC)

Please archieve when the shield is made. Like the purple county routes is. Then we know which shields needs to come out. By the way I thouhgt the shields suppose to take 16 days on average to be manufacture, then how come some only takes less than 20 hours to be made.Freewayguy (Meet) 20:52, 26 February 2008 (UTC)

Depends on the shields. County route shields have a template you can use (see WP:USRD/S/T) to make the shields in about 5 minutes or so. Also, we don't archive immediately so that the requester can see that the shields are ready for use.—Scott5114↗ [EXACT CHANGE ONLY] 22:19, 26 February 2008 (UTC)

Where did you get 16 days from? --Holderca1 ^talk 22:22, 26 February 2008 (UTC)

Then what about Arkansas state shields. You say you would be happy to upload it. Why some shields take more than 16 days to manufacture? I thought much of Arkansas is normal state shields.--Freewayguy (Meet) 02:38, 27 February 2008 (UTC)

You are posting out of order. Anyways, we are still waiting for you to provide the specs for the Arkansas shields. --Holderca1 ^talk 03:06, 27 February 2008 (UTC)

I don't understand what you mean by specs.--Freewayguy (Meet) 03:45, 27 February 2008 (UTC)

The specs for the shield that show how big the numerals are, how big the state name is, etc... --Holderca1 ^talk 03:51, 27 February 2008 (UTC)

Note:There is an error on the shield for CR 643. It is labeled as CR 642. Dough4872 (talk) 02:11, 27 February 2008 (UTC)

Also, I need these two missing shields for Cumberland County:

• 
• 

Dough4872 (talk) 02:30, 27 February 2008 (UTC)

I Created those 2, so it is done? Carpetmaster 101 (talk) 04:01, 27 February 2008 (UTC)

I also fixed CR 643: Carpetmaster 101 (talk) 04:06, 27 February 2008 (UTC)

Thanks Dough4872 (talk) 22:57, 27 February 2008 (UTC)

Image:South Carolina blank.svg

This currently appears on many talk pages as a redlink. --NE2 20:47, 25 February 2008 (UTC)

A blank version has been uploaded. —Mr. Matté (^Talk/_Contrib) 21:27, 25 February 2008 (UTC)

Thank you. --NE2 21:55, 25 February 2008 (UTC)

Suffolk County(New York) Roads 57A & 57B

I never thought I would make such a request again, but I'm going to need some shields for Suffok County Roads 57A & 57B on the List of county routes in Suffolk County, New York. ----DanTD (talk) 18:03, 27 February 2008 (UTC)

Accepted Carpetmaster 101 (talk) 22:56, 27 February 2008 (UTC)

Complete unless there is something wrong with these Carpetmaster 101 (talk) 23:27, 27 February 2008 (UTC)

The only thing I can think of that could possibly be wrong with them, is that they took some time to turn up. Thanks. ----DanTD (talk) 23:56, 27 February 2008 (UTC)

A few more Florida County Road shields

I'm taking another break from my requests for New Mexico and Mississippi shields to do a few more requests for Florida County Road shields this time;

• • County Road 143 (Hamilton County, Florida) for Florida State Road 6, Interstate 75 in Florida, and in the future for Florida State Road 143.
  • County Road 884 (Lee County, Florida) for Florida State Road 884
  • County Road 4009 (Volusia County, Florida) for the article itself.

I tried to wait, but I couldn't fight the urge to make the links. I really should do a few more county-specific lists of County Roads in Florida. ----DanTD (talk) 18:48, 9 January 2008 (UTC)

Accept --Holderca1 ^talk 23:30, 12 February 2008 (UTC)

Complete --Holderca1 ^talk 23:43, 12 February 2008 (UTC)

Thanks a bunch, Holdercal. Now I've got to do a completion list for Volusia County, Florida roads, and one of them includes County Road 2002 (Volusia County, Florida), which crosses into Flagler County, Florida, hence the need for at least one Flagler County shield. ----DanTD (talk) 03:38, 19 February 2008 (UTC)

Tiorati Brook Road

Another Palisades Interstate Park Road shield I'd like to request is for the Tiorati Brook Road like this one, currently for the intersection list of Seven Lakes Drive, but hopefully for any future article on the road, if one is written. Also, if a similar one for Lake Welch Parkway could be made, for both the Seven Lakes Drive intersection and Palisades Interstate Parkway interchange lists, that would be great as well. ----DanTD (talk) 19:35, 22 February 2008 (UTC)

Accepted on both, although it would be best to find a photo of the Lake Welch one so I could get the spacing somewhat correct. —Mr. Matté (^Talk/_Contrib) 21:34, 22 February 2008 (UTC)

Done: , just let me know if you find the other photo. —Mr. Matté (^Talk/_Contrib) 22:22, 22 February 2008 (UTC)

Thanks again. I thought I was going to find the Lake Welch Parkway shield in the same Flickr pages, but I was wrong. Nevertheless, I do remember seeing them Harriman-Bear Mountain State Park area. ----DanTD (talk) 00:17, 23 February 2008 (UTC)

Perhaps we should make a template for these? —Scott5114↗ [EXACT CHANGE ONLY] 05:27, 23 February 2008 (UTC)

Washington State Route 12

I need Image:WA-12.svg for 1964 state highway renumbering (Washington). There was a SR 12 for a couple of years before U.S. Route 12 was extended into the state. -- Kéiryn 01:30, 29 February 2008 (UTC)

Accepted Carpetmaster 101 (talk) 23:55, 29 February 2008 (UTC)

Done Carpetmaster 101 (talk) 00:12, 1 March 2008 (UTC)

Puerto Rico State Highway 22 (same as unsigned PRI-2 [PR paper Interstate 2])

Hi, a highway article I had been contributing to suddenly complained it needed a shield. Can you create it or let me know how it is done? It is for Puerto Rico state highway 22, and I have a rather good jpeg of it in MS Picture Manager, but don't know how to get to you, if that is the procedure. Let me know. Thanks.

wikilink: Puerto Rico Highway 22 link: http://en.wikipedia.org/wiki/Puerto_Rico_Highway_22

CallmeDrNo (talk) 21:54, 2 March 2008 (UTC)

Accept Carpetmaster 101 (talk) 00:36, 4 March 2008 (UTC)

I'm not sure what kind of highway it is or what shield to use. Does anyone know about Puerto Rico routes? Carpetmaster 101 (talk) 01:01, 4 March 2008 (UTC)

Judging from this page and a couple other sources, you're looking for the blue primary sign on List of Puerto Rico highways -- Kéiryn 21:51, 4 March 2008 (UTC)

that's the one - Image:Puerto Rico 1 Highway.svg (sample)  — master son^{T - C} 22:34, 4 March 2008 (UTC)

Except it may be a good idea to add a white square background to it, rather than transparency. As far as I can tell, the stand-alone shields are square. -- Kéiryn 22:38, 4 March 2008 (UTC)

Well here is what I came up with Carpetmaster 101 (talk) 02:11, 5 March 2008 (UTC)

Washington State Route 405

-- another missing shield for 1964 state highway renumbering (Washington). -- Kéiryn ^talk 06:32, 5 March 2008 (UTC)

Accepted

Complete Carpetmaster 101 (talk) 19:08, 5 March 2008 (UTC)

Unless the legislature designates any new routes, this is the last of the post-1964 shields. --NE2 15:19, 6 March 2008 (UTC)

List of county roads in Volusia County, Florida

The existing List of county roads in Volusia County, Florida needs much more work than ther shields, but I'd still like to see the rest of them added, especially for those that already have articles. ----DanTD (talk) 03:41, 6 March 2008 (UTC)

I'll do it tonight. Carpetmaster101 23:34, 6 March 2008 (UTC)

Complete! Carpetmaster101 23:37, 7 March 2008 (UTC)

Thanks. I thought that the addition of these shields would change the existing shield links automatically, but some of them can't even be changed by hand. ----DanTD (talk) 18:07, 8 March 2008 (UTC)

No, you have to go back and purge each individual page by hand. Carpetmaster101 01:05, 9 March 2008 (UTC)

Missing Monmouth Couhty Shield

I would like to request the follwing shield:
Image:Monmouth County Route 14 NJ.svg Dough4872 (talk) 02:30, 15 March 2008 (UTC)

 Enjoy. 哦，是吗？(О кириллицей) 03:33, 15 March 2008 (GMT)

Thanks Dough4872 (talk) 16:35, 16 March 2008 (UTC)

Somerset County shield

I would like to request the follwing missing shield:
Image:Somerset County Route 652 NJ.svg Dough4872 (talk) 17:27, 19 March 2008 (UTC)

Done! —Mr. Matté (^Talk/_Contrib) 17:58, 19 March 2008 (UTC)

Thanks Dough4872 (talk) 18:57, 19 March 2008 (UTC)

Union County shields

I would like to request the first ten shields for List of county routes in Union County, New Jersey:

• Image:Union County Route 601 NJ.svg
• Image:Union County Route 602 NJ.svg
• Image:Union County Route 603 NJ.svg
• Image:Union County Route 604 NJ.svg
• Image:Union County Route 605 NJ.svg
• Image:Union County Route 606 NJ.svg
• Image:Union County Route 608 NJ.svg
• Image:Union County Route 609 NJ.svg
• Image:Union County Route 611 NJ.svg
• Image:Union County Route 612 NJ.svg

Dough4872 (talk) 13:46, 21 March 2008 (UTC)

Accepted. -- Kéiryn ^talk 13:51, 21 March 2008 (UTC)

 Done :-) -- Kéiryn ^talk 14:35, 21 March 2008 (UTC)

Thanks Dough4872 (talk) 14:48, 22 March 2008 (UTC)

New Mexico State Roads

I need shields for New Mexico State Roads 68, 159, 162, and 519 to fill in the blanks on articles for New Mexico State Road 161 and New Mexico State Road 518. I would like to keep going with stub creation for NM SRs but there are so many missing shields; if someone would care to take a crack at getting all the missing shields made, I will continue with making the stubs. In the mean time, I just need those four to finish out the two stubs I just did. OlenWhitaker • ^{talk to me} or _don't • ♣ ♥ ♠ ♦ 17:27, 26 March 2008 (UTC) 17:27, 26 March 2008 (UTC)

Accepted The four listed are done. I'll start on others now. Don't forget to add "?action=purge" at the end of the page's URL to see them in the article. —Mr. Matté (^Talk/_Contrib) 17:54, 26 March 2008 (UTC)

Thanks! OlenWhitaker • ^{talk to me} or _don't • ♣ ♥ ♠ ♦ 19:38, 26 March 2008 (UTC) 19:38, 26 March 2008 (UTC)

Say, could I also trouble you for NM SRs 377, 378, 386, and 522? OlenWhitaker • ^{talk to me} or _don't • ♣ ♥ ♠ ♦ 20:50, 26 March 2008 (UTC) 20:50, 26 March 2008 (UTC)

Sure thing! Done —Mr. Matté (^Talk/_Contrib) 20:52, 26 March 2008 (UTC)

Thanks again! You 'da man! OlenWhitaker • ^{talk to me} or _don't • ♣ ♥ ♠ ♦ 22:00, 26 March 2008 (UTC)

Ok, I swear this is the last of it! I need NM SRs 38 & 523 to finish out New Mexico State Road 522 and then I promise not to bother you again. I'm going to work on Colorado for a while since all the CO shields are ready, then I'll come back to tackle NM a little later. OlenWhitaker • ^{talk to me} or _don't • ♣ ♥ ♠ ♦ 22:30, 26 March 2008 (UTC)

That's OK, I'm working on getting all of them done right now anyway. :) —Mr. Matté (^Talk/_Contrib) 22:53, 26 March 2008 (UTC)

Colorado State Highway 21

This recently created highway needs a recently created shield. OlenWhitaker • ^{talk to me} or _don't • ♣ ♥ ♠ ♦ 23:57, 27 March 2008 (UTC)

I'll make it now Carpetmaster101 00:18, 30 March 2008 (UTC)

 Done Carpetmaster101 00:57, 30 March 2008 (UTC)

Thanks! OlenWhitaker • ^{talk to me} or _don't • ♣ ♥ ♠ ♦ 01:17, 30 March 2008 (UTC)

183A toll road shield

Could someone create the shield for the 183A toll road. It can be seen in this picture: [3]. The current png is not accurate at all. This is probably copyrighted and should be created as a png. In fact, just upload over Image:183A_toll_road.png. --Holderca1 ^talk 21:29, 20 February 2008 (UTC)

Image:183A toll road.png This is the best that I could do. At least it is better than what was there. Carpetmaster101 04:11, 24 March 2008 (UTC)

The blue looks a little bright, perhaps it could be a little darker? --Holderca1 ^talk 12:43, 28 March 2008 (UTC)

This appears to have been resolved. If so, I'll archive it. --TMF ^{Let's Go Mets - Stats} 18:55, 7 April 2008 (UTC)

New York State Route 48A

New Request: New York State Route 48A sheild, for a chapter of New York State Route 48. ----DanTD (talk) 21:03, 9 April 2008 (UTC)

• Accept, will be done in a couple of hours. --TMF ^{Let's Go Mets - Stats} 21:17, 9 April 2008 (UTC)
• Done Image:NY-48A.svg --TMF ^{Let's Go Mets - Stats} 17:09, 10 April 2008 (UTC)

County Road 483 (Volusia County, Florida)

Another Volusia CR shield request for both County Road 483 (Volusia County, Florida) and the List of county roads in Volusia County, Florida. After that, I think I'll do more work on some other Florida County Road list and request shields for those. ----DanTD (talk) 00:23, 2 April 2008 (UTC)

While I'm at it, I'm also requesting shields for Volusia CR's 2833, and 4023. ----DanTD (talk) 00:57, 2 April 2008 (UTC)

Accepted Carpetmaster101 01:58, 5 April 2008 (UTC)

 Done Carpetmaster101 23:14, 11 April 2008 (UTC)

Really? I can't find them. I was able to add VCR 483, but I don't see it turning up in the other articles where it should be. ----DanTD (talk) 13:18, 12 April 2008 (UTC)

'UPDATE': There they are. Thnaks. ----DanTD (talk) 14:43, 12 April 2008 (UTC)

Oklahoma State Highway 74B

The current shield image needs to be replaced. The bottom of the state outline (I think) is geographically accurate instead of simplistic, so it shows up too thick when you make the shield samller (i.e. 20x25px). You can compare the images at right, also take a look in Goldsby on the OK-74 junction list for what I'm talking about...

Also, while I was trying to get the images to appear at right, I noticed that the 74B image uses a different naming convention. -- Kéiryn ^talk 16:03, 11 April 2008 (UTC)

Yeah, that was the test image that SPUI was working on when he was trying to make better Oklahoma shields. He uploaded it to the shorter convention because his batch upload script didn't support uploading over existing images, and all the old crappy SVGs that I had made before the new shields were common were at the "Oklahoma State Highway x.svg" convention (see Oklahoma State Highway 165.svg for an example of an old crappy SVG, that I replace with one of SPUI's as time permits). I'll upload a "better" version here in a bit, just haven't really gotten around to it because it didn't seem like a very high priority task. —Scott5114↗ [EXACT CHANGE ONLY] 17:04, 11 April 2008 (UTC)

Done. Image:Oklahoma State Highway 74B.svg. 4 minutes between 'accept' and 'done'... I do believe I just set a record :) —Scott5114↗ [EXACT CHANGE ONLY] 17:09, 11 April 2008 (UTC)

Arkansas state shields

Well, There in Arkansas is no entry of sign drawing in MUTCD site. But the current status is still state shields.

• 
• 
• 
• 
• 

--Freewayguy (Meet) 04:19, 16 February 2008 (UTC)

Note to anyone doing these: Arkansas seems to use an older version of the MUTCD for their shields...possibly the first specification? At right is a photo of one from near the Oklahoma state line. Hm, this gives me an idea....

If I could get the exact specs for these, I would be happy to do them. Would you like , , and as well? --Holderca1 ^talk 15:03, 18 February 2008 (UTC)

Sure, I'll like those shields. Just I try to limit so I wont have over 10 requests at a time. That will be helpful to upload them. matter of fact much of Arkansas is state shields.Freewayguy (Meet) 05:17, 23 February 2008 (UTC)

Accept: Just because you can't find specs doesnt mean we shouldn't upload it. The sign drawings is tough to find even Missouri, I cant find the specs for Iowa either. There is no source either say Arkansas no longer specifies state shields. Sometimes the map on interstate-guide is right AR is shade in blue anyways. Dont be too obsess with state documents either.--Freewayguy (Webmail) 00:11, 12 March 2008 (UTC)

By marking this accept, you do realize you're saying you're going to make them, right? You've said before that you don't know how to make shields. Just be patient. Nobody is doing to die if we don't have state-name shields for Arkansas. Better to be slow and get it right than to rush through with bad specifications and botch it. —Scott5114↗ [EXACT CHANGE ONLY] 00:17, 12 March 2008 (UTC)

Anyone want to try emailing AHTD and asking them for a copy of the specs? Their website isn't really that helpful... —Scott5114↗ [EXACT CHANGE ONLY] 00:19, 12 March 2008 (UTC)

Whats an AHTD? I never hear this term and I dont know who to contact and I dont know their e-mail address. Alot of states such as Michigan dont use state-name shields, then why we for? --Freewayguy (Webmail) 00:30, 12 March 2008 (UTC)

Arkansas Highway and Transportation Department —Scott5114↗ [EXACT CHANGE ONLY] 00:38, 12 March 2008 (UTC)

That shield image exists because someone created it a while ago when they shouldn't have. The 3di template we use has been updated since then to make the numbers the correct size and to add in the border around the shield. Things like that happen when you don't wait to have the proper specs. -- Kéiryn ^talk 00:41, 12 March 2008 (UTC)

I'm not sure I understand what the big rush is here. There are shields that adequately fill the void already and there is no deadline on these requests. Based on your edit history, it doesn't appear you have ever edited a Arkansas highway. --Holderca1 ^talk 00:37, 13 March 2008 (UTC)

Well, Arkansas is secretive about what they do;so we don't have access to state document right now. There is no such new shields post in Arkansas only guide-using shield the green display board like this ex. only in California Central-East Los Angeles. I think ARDOT still uses specific-state-name shields, and generally much of what i see is state-specific name shields. Same thing as Kansas. The KDOT uses state-name shields, but they have contraction errors because they dont have proper sign-drawing either. We cant find the proper specs for Kansas either.--Freewayguy (Webmail) 19:35, 26 March 2008 (UTC)

Ok, I made the shields for everybody. I made the new shields (the ones with the bigger numbers) and the old shields (the ones with the smaller numbers). I hope you like them.

--Ltljltlj (talk) 05:50, 1 April 2008 (UTC)

Might as well as do ones for I-49 and I-69 while you are at it. --Holderca1 ^talk 21:21, 2 April 2008 (UTC)

Here is I-49 and I-69 for you. --Ltljltlj (talk) 16:43, 16 April 2008 (UTC)

Old interstate shields

I wonder if someone could make a graphic showing each revision of the Interstate shield since it was first added to the MUTCD? I know the numbers have gradually increased as time as gone on, and the state name was originally mandatory. Thanks to anyone who can fulfill this. —Scott5114↗ [EXACT CHANGE ONLY] 18:36, 16 February 2008 (UTC)

Off-topic stuff not related to actual request

• I thouhgt there is no definite time of when the state shields aftually stop. Or formerly, the interstate shields was formerly control by FHWA, this is why before everybody has to have specific state name on interstates. Maryland has no control on state or neutral shields thats why the state document say neutral shields (However the neutral shields I thouhgt is not mandatory). Same situation as Minnesota. Georgia the Interstate-Guide paint them black thats wrong. When they say Georgia no longer use state shields after 1999 thats wrong too. Now the GADOT still makes specific state shields, just the GADOT no longer controls the shield making. Thats why GA gets option of making either state or neutral shields. In Nevada, the state shields is still many.
  • Hawaii uses neutral shields in sign drawing, but my current desktop to my wallpaper is state shields. There is actually more state shields newer made than neutral shields. Few states the sign drawing still takes control. In Kansas the DOT has no document but I think is the sunflower or element branch makes the state name shields mandatory. In Oklahoma the sign interstate is also cntrol. Many shields in Oklahoma is old this is why the state name is missing. However I think alot is recently tooken away and replace with normal state shields. I beleive newer ones have state names than the older ones. Arizona still uses normal state shields on sign drawing and their last revision is February 2005, meaning the state shields is still current. Missouri uses normal state shields in state document, however several state names on primary interstates is missing (per I-5, I-44, and I-64) potentially due to contraction makers. Oregon no longer have control, however the state shields last post on I-105/I-5 interchange over summer of 2007. They do his occasionally.--Freewayguy (Meet) 19:00, 18 February 2008 (UTC)

Huh? I am not sure what you are trying to say. What do you mean by a state no longer has control? Also, keep in mind, a state may have the state specific shields posted, but no longer use that them. They changed over, but only replace the old shields when they need replaced. For example, Texas changed over to the neutral shields a while back, but I still see the state specific shields here and there. --Holderca1 ^talk 19:31, 18 February 2008 (UTC) There is two specific-state name shields post at summer of 2007 of I-105/5 interchange. When state no longer have control means they can use both nuetral or state shields. In sign drawing is just neutral shields (They can still use state shileds if they want). Vermont post a specific state-name shields at I-89 over summer 2007, Flor post namy state-name shields over summer 2006, Idaho post about 5 more I think.--Freewayguy (talk) 19:47, 18 February 2008 (UTC) In Virginia they did the same thing. The older interstates is missing state names. However the I-66 one is still putting the specific state name back in 2005.--Freewayguy (Meet) 20:08, 18 February 2008 (UTC)

---

No, no, no, no, you're all misunderstanding this. This would just be a single graphic with one example shield made from each of the official MUTCD specs through the years, along with a label next to it showing the year. —Scott5114↗ [EXACT CHANGE ONLY] 21:26, 18 February 2008 (UTC) I thought the state shield makes never terminates. Now Oregon made two state shields as summer 2007. Posting state shields under nuetral shields in state docment I thouhgt is not an erro. New York post numerous state shields 4 years ago. South Carolina still makes new specific state shields.--Freewayguy (Meet) 03:58, 19 February 2008 (UTC)

Again, this has nothing to do with that. —Scott5114↗ [EXACT CHANGE ONLY] 04:54, 19 February 2008 (UTC)

I still have no idea what you are talking about, if the state doesn't have control, who does? --Holderca1 ^talk 11:37, 19 February 2008 (UTC)

Do you have the specs for each version of the MUTCD? --Holderca1 ^talk 11:39, 19 February 2008 (UTC)

Not sure. There may be a few in the university library. —Scott5114↗ [EXACT CHANGE ONLY] 18:24, 19 February 2008 (UTC)

I agree, if we can get the actual specs to make this, this would be a good image to place in the signage section of the Interstate Highway System article. --TMF ^{Let's Go Mets - Stats} 20:46, 19 February 2008 (UTC)

My university library appears to have copies of the 1978 and 1985 SHS, and apparently an electronic version of the Millenium Edition. Since that would involve scanning and such, probably, I think I'll query MTR and see if anyone (possibly Richard Moeur?) happens to have copies of the specs lying around somewhere.—Scott5114↗ [EXACT CHANGE ONLY] 20:55, 19 February 2008 (UTC)

Through an MTR post, I have Image:1979 SHS M1-1.pdf! —Scott5114↗ [EXACT CHANGE ONLY] 03:52, 21 February 2008 (UTC)

Off-topic stuff not related to actual request

If the state document uses neutral shields is only suggestion. They can still use specific state shields if they want to. Maryland post like 5 to 10 specific state shields over 2006, same as South Carolina and Alabama. Idaho post tons of specific state shields as July 2007.--Freewayguy (Meet) 20:39, 19 February 2008 (UTC)

That has no relevance to this request. --TMF ^{Let's Go Mets - Stats} 20:46, 19 February 2008 (UTC)

Not sure why you keep rambling on about this. Also, do the states actually keep a log of what shields they replace and where by year?? I have never seen such info. --Holderca1 ^talk 21:13, 19 February 2008 (UTC)

Some states place a date of manufacture on the shield. But seriously, this has nothing to do with my request, so let's quit talking about state vs. neutral shields. —Scott5114↗ [EXACT CHANGE ONLY] 21:33, 19 February 2008 (UTC)

I thouhgt I move all this section to Talk:Interstate Highway System because this is not a place to talk about state vs. neutral shields. I didnt start this conv. somebody else did. Why dont we just remove this section.--Freewayguy (Meet) 20:52, 20 February 2008 (UTC)

Because you're the only person talking about state vs. neutral shields. The rest of us are discussing the actual shield request. —Scott5114↗ [EXACT CHANGE ONLY] 20:57, 20 February 2008 (UTC)

Okay, I only have the one SHS posted above that we can use. I checked the library, which only had the same SHS, but they did have a 1988 MUTCD, and the shield it showed as an example for the M1-1 (no specs were given) had larger numbers and a Series C font. I'm not sure whether this is significant or not, but if anyone's actively in the process of trying to dig up specs, perhaps the 1988 SHS would be a good target to search for. —Scott5114↗ [EXACT CHANGE ONLY] 07:15, 28 February 2008 (UTC)

Essex County shields

I would like to request the missing county route shields for List of county routes in Essex County, New Jersey. Dough4872 (talk) 22:26, 21 April 2008 (UTC)

Accepted. Done, they're being uploaded right now. If you don't mind, I'll put them into the page. :) —Mr. Matté (^Talk/_Contrib) 23:49, 21 April 2008 (UTC)

Thanks Dough4872 (talk) 22:04, 22 April 2008 (UTC)

Historic Oregon US 30

I would like an SVG of the design ODOT is planning for the Historic Columbia River Highway. It would look similar to Image:Historic US 50 (CA).svg but with several changes, as described in [4]:

• The light brown should be white
• CALIFORNIA 50 should be OREGON 30 (duh)
• OREGON US 30 - but not HISTORIC ROUTE - should be in the old style font

Thank you. --NE2 01:50, 22 April 2008 (UTC)

Something along the lines of this?

Luokou (talk) 04:52, 29 April 2008 (UTC)

Basically, though I'm not sure the OREGON / US is correct. I believe [5] is the right style. --NE2 09:19, 30 April 2008 (UTC)

 Done I was able to improve it in Inkscape. --NE2 16:04, 6 May 2008 (UTC)

Arizona spur routes

Need shields for Arizona spurs, see image here: [6]. I need the following:

• 
• 
• 
• 
• 

Thanks! --Holderca1 ^talk 03:12, 22 April 2008 (UTC)

Accepted and Done --Ltljltlj (talk) 22:05, 22 April 2008 (UTC)

Thanks, on the 3-digit signs, it looks like the S is about to fall off the shield, any way to nudge that over a bit? --Holderca1 ^talk 16:04, 23 April 2008 (UTC)

I was able to nudge them, but I don't know if thats too far of a nudge or not. Its hard when the specs don't include the ones with the S. See if you can find a pic of a 3-digit shield so I can work off that because I don't even know if they use Series C or Series B. --Ltljltlj (talk) 18:32, 23 April 2008 (UTC)

Ug, trying to find one, I found this picture with a spur plate over a standard sign. I now have no idea how they are supposed to be signed since the "SPUR" plate isn't listed in ADOT's specs either. --Holderca1 ^talk 19:00, 23 April 2008 (UTC)

I would think that they probably use Series B but I'm not certain. --Ltljltlj (talk) 19:13, 23 April 2008 (UTC)

Passaic County shields

I would like to request the missing shields for List of county routes in Passaic County, New Jersey. Dough4872 (talk) 00:49, 27 April 2008 (UTC)

Accepted on this one. Done; uploading in progress. —Mr. Matté (^Talk/_Contrib) 02:35, 27 April 2008 (UTC)

Thanks Dough4872 (talk) 00:37, 28 April 2008 (UTC)

Hudson County shields

I would like to request this missing shield for List of county routes in Hudson County, New Jersey:

• Image:Hudson County Route 728 NJ.svg

I would also like Image:Hudson County Route 621 NJ.svg to be fixed. It is labeled as CR 662 instead of CR 621. Dough4872 (talk) 01:08, 28 April 2008 (UTC)

• Accepted. -- Kéiryn ^talk 14:01, 28 April 2008 (UTC)

Done. -- Kéiryn ^talk 15:30, 28 April 2008 (UTC)

Thanks Dough4872 (talk) 20:57, 28 April 2008 (UTC)

Alabama state routes

Need Image:Alabama 209.svg and Image:Alabama 604.svg for List of state highways in Alabama pretty pretty please? -- Kéiryn ^talk 00:47, 30 April 2008 (UTC)

Accepted and Done. --Ltljltlj (talk) 04:23, 30 April 2008 (UTC)

Dutchess County Route 2

Requesting Image:Dutchess County Route 2 NY.svg for the purpose of putting into the infobox of Connecticut Route 41. Thanks. --Polaron | Talk 02:26, 2 May 2008 (UTC)

• Accepted and done - - There ya go.^Mitch32^contribs 18:27, 2 May 2008 (UTC)

Missing Bergen County shield

I would like to request Image:Bergen County S-109.svg for List of county routes in Bergen County, New Jersey. The shield should be of the same design as the other Bergen County shields. Dough4872 (talk) 03:15, 2 May 2008 (UTC)

Accepted, although it may be a day or two before I get to it. -- Kéiryn ^talk 14:02, 2 May 2008 (UTC)

Thanks Dough4872 (talk) 00:34, 3 May 2008 (UTC)

 Done Apologies for the delay. -- Kéiryn ^talk 23:34, 6 May 2008 (UTC)

Thanks Dough4872 (talk) 20:57, 8 May 2008 (UTC)

Missing Nevada shields

These aren't needed now but I figured I'd make a list of the known routes with missing shields, in case somebody wants to make them:

--NE2 07:56, 14 May 2008 (UTC)

Accepted. —Mr. Matté (^Talk/_Contrib) 10:07, 14 May 2008 (UTC)

Done, uploading in progress, including NV 94. —Mr. Matté (^Talk/_Contrib) 20:51, 14 May 2008 (UTC)

Thank you. --NE2 12:35, 15 May 2008 (UTC)

Utah interstate shields

I originally filed this request on Luokou's page, but seeing as he hasn't been active for a while, I thought it would be better to make my request here. Luokou made shields based upon Oregon specs for the Oregon interstate articles, and when I saw them I thought they looked very very similar, if not the same, as the standard Utah interstate shields. Could someone make an I-15 or I-80 shield based on the Oregon specs for now so I could see if it would work? If so we would need I-15, I-70, I-80, I-84 (which already exists but under an Oregon filename), and I-215. Thanks - CL — 17:01, 18 May 2008 (UTC)

What type of shields? State name specific like or shields like ?--Freewayguy ^{TL C} 00:36, 20 May 2008 (UTC)

The neutered ones. Take a look at... Image:I-205 (Oregon).svg, that's what I want except a 215 in place of 205. CL — 00:57, 20 May 2008 (UTC)

And Image:I-84 (Oregon).svg for the two digit ones as well. CL — 01:14, 20 May 2008 (UTC)

Okay, like this image? I dont make shields, and we have ; so do you want File:I-15 (Utah).svg?--Freewayguy ^{TL C} 01:17, 20 May 2008 (UTC)

So Countylemonade, just hang on for a while; I don't know how to make shields, so if you provide the proper sign drawing for somebody, somebody will take a look at it.--Freewayguy ^{TL C} 01:18, 20 May 2008 (UTC)

There are specs for two- and three-digit shields that are provided here, on this pdf. I know they are Oregon specs but they are pretty much the same as Utah's, so they can be used for making shields in this case. I need 15, 70, 80, 84 (which can be copied to a new file location as it is already here) and 215 shields. That I-15 image you found isn't under Utah spec, for some reason they used EM font on it when it was supposed to be D. CL — 01:28, 20 May 2008 (UTC)

Accept if I can make those shields. But hang on a little longer, I'm sure somebody will accept your task force and upload them soon.--Freewayguy ^{TL C} 01:35, 20 May 2008 (UTC)

Alright, thank you for your time! CL — 01:49, 20 May 2008 (UTC)

By the way, Freewayguy, the image for I-84 already exists. All that needs to be done is get Image:I-84 (Oregon).svg copied so there is the same shield under Image:I-84 (Utah).svg. CL — 21:48, 20 May 2008 (UTC)

Filenames for the shields (naming conventions)

• Image:I-15 (UT).svg
• Image:I-70 (UT).svg
• Image:I-80 (UT).svg
• Image:I-84 (UT).svg - decided to duplicate myself
• Image:I-215 (UT).svg (which will need to be overwritten)

CL — 05:10, 22 May 2008 (UTC)

County Lemonade; I figure out you can make those shields your self. You can move the state-specific I-215 to Image:I-215 (Utah).svg, and I-215 (UT) can be neutralize shield.I guess you do to others same as you did to i-84 (UT).svg.--Freewayguy ^{T C} 23:21, 23 May 2008 (UTC)

The I-215 image will need to be overwritten anyway, I've never seen it being used here. I could only do what I did to I-84 because it already existed, but under a different filename. All the rest of them (including 215) need to be created from scratch. CL — 01:22, 24 May 2008 (UTC)

The state-name specific then needs to go on Image:I-215 (Utah).svg becasue UT has use state-name specific in the past Countylemonade, and there is not valdi ration to delete it. You can overwrite Iamge:I-215 (UT).svg, but you need to put the state/specific on another name.--Freewayguy ^{T C} 02:44, 24 May 2008 (UTC)

Okay, I will duplicate the existing 215 one for formatting's sake, as they need to be under one common file name to work under the infobox. CL — 02:52, 24 May 2008 (UTC)

I just duplicated the 215 image, so whoever is going to make these shields can go ahead and overwrite it. CL — 03:02, 24 May 2008 (UTC)

You can overwrite it if you want, so to avoid duplicate images, since the otehr one have been exist.--Freewayguy ^{T C} 03:09, 24 May 2008 (UTC)

Sorry, I didn't get what you meant there. CL — 03:14, 24 May 2008 (UTC)

Now you can overwrite Image:I-215 (UT).svg with the same format as Image:I-84 (UT).svg by neutralizizng that shield.--Freewayguy ^{T C} 03:16, 24 May 2008 (UTC)

What do you mean? It wasn't me who neutralized Image:I-84 (UT).svg, that image was already created by someone else. Am I getting what you mean? CL — 03:19, 24 May 2008 (UTC)

• Well, you made Image:I-84 (UT).svg, see the blue link.--Freewayguy ^{T C} 03:27, 24 May 2008 (UTC)

Yup, but only because User:Luokou had made the exact same image before. All I did was save Image:I-84 (Oregon).svg on my computer and then reupload that file as Image:I-84 (UT).svg. I have no idea how to actually make shields. CL — 03:34, 24 May 2008 (UTC)

I was able to make those shields for you. I just switched the state name with the word 'big' since other states use those too.--Ltljltlj (talk) 04:44, 24 May 2008 (UTC)

Thank you so much! I updated {{Infobox road/UT/shield Interstate}} but the update doesn't show up any of the infoboxes (I-15, I-70, I-80, I-84 or I-215), so I'm not sure what else to do. CL — 16:00, 24 May 2008 (UTC)

Ocean Drive shield

I need a shield for Ocean Drive (New Jersey). A picture of one can be found here. Dough4872 (talk) 21:38, 23 February 2008 (UTC)

ACCEPTEDCarpetmaster 101 (talk) 00:51, 28 February 2008 (UTC)

 Done Finally! Image:Ocean Drive NJ.svg Carpetmaster101 05:50, 12 July 2008 (UTC)

Thanks Dough4872 (talk) 17:28, 20 July 2008 (UTC)

More Florida County Road lists

Once again, I'm requesting shields for lists of County Roads in Alachua County, Florida and Dixie County, Florida, but I also requesting one for Gilchrist County Road 340, and Wakulla County Road 368. I'll request the other Gilchrist County roads when I'm ready for them. ----DanTD (talk) 23:37, 16 April 2008 (UTC)

While your at it, a shield for County Road 4125 (Volusia County, Florida) on the Volusia County, Florida County Road list is also something I'd like to request. ----DanTD (talk) 04:07, 18 April 2008 (UTC)

Has this request been accepted and/or done yet? -- Kéiryn (talk) 19:55, 5 June 2008 (UTC)

Unfortunatley, no. The Lists of county roads in Alachua County and Dixie County, Florida haven't been touched, and besided that I recently added new shield links for List of county roads in Sumter County, Florida, which I just found out about recently. ----DanTD (talk) 21:48, 5 June 2008 (UTC)

Accept. I was able to make the template myself yesterday before I saw Carpetmaster's posting below, and have already started work on the project. -- Kéiryn (talk) 14:00, 23 June 2008 (UTC)

Thanks, but be advised I'm finding more Volusia County Roads that I never knew existed. ----DanTD (talk) 17:21, 23 June 2008 (UTC)

 Done Anything currently on the lists should have shields now. If you're still finding more for Volusia County, feel free to re-request them. -- Kéiryn (talk) 00:53, 28 June 2008 (UTC)

There are still a few that haven't been taken care of. I'll wait until you fix those before I request Volusia and Sumter County shields. ----DanTD (talk) 12:51, 28 June 2008 (UTC)

 Done I only counted two on the Alachua list that I glossed over somehow, plus one on the Volusia list. -- Kéiryn (talk) 22:39, 1 July 2008 (UTC)

Thanks. This only leaves two Dixie County, Roads, although I'm finding out so much more about Volusia and other Florida County Roads. ----DanTD (talk) 00:17, 2 July 2008 (UTC)

All the Dixie County roads on the list currently have shields. Make sure you refresh your browser (and make a null edit if need be) to ensure you're looking at the current version of the page, and not something in your cache. -- Kéiryn (talk) 01:04, 2 July 2008 (UTC)

It was the null edit that did the trick. Thanks again. ----DanTD (talk) 01:18, 2 July 2008 (UTC)

Two unrelated shields

Need a couple of shields that I probably won't have a chance to make myself any time in the near future.

• Image:Middlesex County Route 626 NJ.svg for County Route 6A (Monmouth County, New Jersey)
• Image:MA Route 208.svg to replace the 2-year-old GIF on Maine State Route 208

Thanks! -- Kéiryn (talk) 17:07, 5 June 2008 (UTC)

Need Image:MA Route 207.svg as well for the infobox pretty pretty please. -- Kéiryn (talk) 17:20, 5 June 2008 (UTC)

The Middlesex County one is up, but since there's no template for the MA shields (and using own tactics, can't accurately determine the height of the numerals), I can't make them. —Mr. Matté (^Talk/_Contrib) 22:01, 5 June 2008 (UTC)

All Done. I found what was with the MA shields, both 207 and 8 are up, as well as a template for the MA shields. —Mr. Matté (^Talk/_Contrib) 03:04, 7 June 2008 (UTC)

Florida County Road shield

Image:Orange County Road 15 FL.svg for the exit list on Florida State Road 417 s'il vous plait. Also, whoever's been doing the special Florida county road shields (i.e. small numbers, Series D for all digits), if you could upload a template, I'd be more than willing to help out. -- Kéiryn (talk) 20:29, 14 June 2008 (UTC)

Also Image:Dixie County Road 340 FL.svg and Image:Dixie County Road 351 FL.svg pretty pretty please. I'm awfully needy. *grins* -- Kéiryn (talk) 17:55, 15 June 2008 (UTC)

I'll make the shields Carpetmaster101 15:28, 19 June 2008 (UTC)

 Done As for the template, do you mean for a shield like this: Image:Volusia County Road 4019 FL.svg ? Carpetmaster101 16:37, 19 June 2008 (UTC)

I'm certainly glad you made these. But could you work on the ones I requested in April 2008 as well? ----DanTD (talk) 16:28, 19 June 2008 (UTC)

Warren County, NY shields

The CRs in List of highways in Warren County, New York need shield except for CRs 4, 23, and 58. Also, the reference routes New York State Route 911E and New York State Route 912Q need reference marker shields. Thanks!^Mitch32^contribs 16:30, 21 June 2008 (UTC)

Accept. Carpetmaster101 04:20, 25 June 2008 (UTC)

• Image:NY-911E.svg
• Image:NY-912Q.svg Carpetmaster101 05:01, 7 July 2008 (UTC)

 Done Carpetmaster101 02:36, 12 July 2008 (UTC)

Two missing Utah SRs

While these two are not signed, SR-900 and SR-901 are missing shields. I'm requesting them for the purpose of having an image in the browse bar (for example here). Thanks for the time - CL — 07:02, 28 June 2008 (UTC)

 Done Here they are: Image:Utah SR 900.svg, Image:Utah SR 901.svg —Mr. Matté (^Talk/_Contrib) 06:27, 7 July 2008 (UTC)

Thanks, they're just what I needed. Cheers - CL — 17:59, 7 July 2008 (UTC)

"Emergency" aux plate

I am requesting an orange "Emergency" aux plate for Emergency U.S. Route 30 (see an example at [7]). --Admrb♉ltz (t • c • log) 06:47, 6 July 2008 (UTC)

 Done, here it is: —Mr. Matté (^Talk/_Contrib) 16:23, 6 July 2008 (UTC)

Thanks! Its such a silly plate, but it works well in its article now. --Admrb♉ltz (t • c • log) 18:42, 6 July 2008 (UTC)

Arkansas Highway 86

Could use Image:Arkansas 86.svg for the infobox pretty please. -- Kéiryn (talk) 00:29, 10 July 2008 (UTC)

 Done, but I'm not sure if it's aligned properly. —Mr. Matté (^Talk/_Contrib) 00:52, 10 July 2008 (UTC)

Missing Iowa purple county routes

I found 2 missing shields still in maroon link. I'm a little bore right now, if somebody will work on it; I would like it.--Freewayguy ^{Call? Fish} 20:34, 11 July 2008 (UTC)

• Image:County Route D48 IA.svg
• Image:County Route D62 IA.svg

What County are they for? Carpetmaster101 02:57, 12 July 2008 (UTC)

Benton 62, Buchanan 48 --Admrb♉ltz (t • c • log) 03:23, 12 July 2008 (UTC)

Accept Carpetmaster101 06:03, 12 July 2008 (UTC)

 Done

Image:Benton County Route D62 IA.svg

Image:Buchanan County Route D48 IA.svg Carpetmaster101 15:41, 12 July 2008 (UTC)

I might be able to get to these myself later today, but in case anyone's manning this page now (I'm away from my home computer), the same article (Iowa Highway 150) also needs Image:Benton County Route E16 IA.svg and Image:Benton County Route V71 IA.svg. -- Kéiryn (talk) 16:25, 14 July 2008 (UTC)

 Done —Mr. Matté (^Talk/_Contrib) 20:29, 14 July 2008 (UTC)

Forest Route 20

I would like a shield for Forest Route 20, to use in the Mountain Loop Highway article. Examples are is Image:Forest Route 3.svg, Image:Forest Route 25.svg, and the shield is on the picture on the right side here. The location of the shield should be Image:Forest Route 20.svg. --CG was here. (T - C - S - E) 22:27, 12 July 2008 (UTC)

Accept Carpetmaster101 03:27, 13 July 2008 (UTC)

 Done, there you go. Carpetmaster101 03:53, 13 July 2008 (UTC)

Reference marker needed

I need a reference marker shield for NY 376D. Yes, NY 376D. The shield specifications I need are these:

• First row: 3-7-6-D
• Second rw: 8-2-0-1
• Third row: 1-0-7-5

I know its a little strange, but its important I get it done.Mitch32^(UP) 23:52, 16 July 2008 (UTC)

Accept Carpetmaster101 03:01, 17 July 2008 (UTC)

 Done Image:NY-376D.svg Carpetmaster101 03:24, 17 July 2008 (UTC)

Missing Monmouth County shields

I would like to request a missing shield for a former route in Monmouth County, New Jersey:

• Image:Monmouth County Route 42 NJ.svg

Dough4872 (talk) 17:36, 20 July 2008 (UTC)

 Done Luokou (talk) 21:55, 20 July 2008 (UTC)

Thanks Dough4872 (talk) 04:13, 21 July 2008 (UTC)

Historic shields-US 10 and 99

I would like the historic shields of US 10 and US 99 (US 99 outside of California, which has a historic shield already). An example is Image:US 66 (historic).svg. So, please upload them at the following names in svg. Thanks!

• Image:US 99 (historic).svg
• Image:US 10 (historic).svg

— ComputerGuy890100^{Talk to me}_{What I've done to help Wikipedia} 20:44, 31 May 2008 (UTC)

That's a specific sign that's actually posted relatively frequently along the historic alignment of Route 66. Washington doesn't post any historical signs along old US 99 or US 10. -- Kéiryn (talk) 17:11, 5 June 2008 (UTC)

Capitol Loop (Lansing, Michigan)

Can someone redraw this route's shield as a svg? Imzadi1979 (talk) 22:40, 1 February 2008 (UTC)

Is it public domain? If not, it may be against the NFCC to make one for it - in which case a PNG will be made instead. Although, either way will be better than the GIF that's there now... --TMF ^{Let's Go Mets - Stats} 21:08, 19 February 2008 (UTC)

I created on at Image:CapitolLoop.png earlier today. Imzadi1979 (talk) 05:52, 15 October 2008 (UTC)

Old style (California) Interstate templates

California and other states use the older style Interstate shields with the state name, but there's no templates for 2-digit or 3-digit. --Fredddie (talk) 11:07, 16 July 2008 (UTC)

Not completely sure if this is what you're talking about, but Image:US DOT FHWA MUTCD SHS 2004 3-1 M1-1 600x600mm 88 NY.svg and Image:US DOT FHWA MUTCD SHS 2004 3-1 M1-1 750x600mm 678 NY.svg are the existing two and three digit with state name templates. —Scott5114↗ [EXACT CHANGE ONLY] 21:11, 16 July 2008 (UTC)

No, they're not the same. The white border around the shields are thicker than on these templates.--Fredddie (talk) 04:28, 17 July 2008 (UTC)

I'm not certian what your' talking about either. California still specify normal state shields in state document. Take a look at this diagram, and its link on every CA interstate shield. I'm not certain what you actually want. If you want to continue this conversation, you need to continue it somewhere else, because this place is for users to ask for shield ahsn't exist yet, ex. of purple county routes missing, or secondary highway when user don't exactly know how to make it.--Freewayguy ^{Call? Fish} 00:32, 23 July 2008 (UTC)

I'm sorry if I'm not clear, but I'm trying to request a template for shields that correctly uses the California diagram linked by User:Freewayguy. I don't have any idea what User:Freewayguy was trying to say, but I don't know of a template request page, or any other place other than here to request it, and I can't figure out Inkscape to save my life. So I asked here. --Fredddie (talk) 04:44, 2 August 2008 (UTC)

I think i know what you're getting at here... so i took the liberty to make some template shields from the existing ones. I left the text in these files fully editable, so all you have to do is get Inkscape or a program which will handle .svg files fine, plus the corresponding Roadgeek fonts. Afterwards, you can convert your edited text into paths and then save/upload/put your new shields wherever you need them to be. BTW, don't worry about how the shields look now, once the correct font is applied it'll look fine. Luokou (talk) 01:16, 6 August 2008 (UTC)

Yes! Thank you! --Fredddie (talk) 03:31, 7 August 2008 (UTC)

Another round of Florida County Road lists

This time I'm entering a list of shields for County Road lists in Columbia County, Flagler County, Gilchrist County and Wakulla County, Florida. Plus for Interstate 95 in Florida(Who screwed up that exit list?), I'd like to see shields for Palm Beach CR 809 and Martin CR 714. ----DanTD (talk) 14:49, 20 July 2008 (UTC)

Accept, I'll start working on them tonight. Carpetmaster101 02:42, 21 July 2008 (UTC)

I see you've also started by correcting some of my erroneous links. Thnaks so far. ----DanTD (talk)

On another topic, are any of the old requests going to be archived soon? ----DanTD (talk) 14:20, 21 July 2008 (UTC)

 Done with those shields are there any others that you need? --Carpetmaster101 04:12, 22 July 2008 (UTC)

Right now, I can't think of any. I've been making a few more Florida CR lists, but I'll wait until I'm finished with those before I make any related requests. Again, thanks. ----DanTD (talk) 13:40, 22 July 2008 (UTC)

Renaming several shields

Freewayguy has asked me to rename several shields from "Interstate-X (New York)" to "I-X (NYST)" to better fit the naming convention. ("I-X (NY)" shields already exist and are the New York-specific non-state-name shields). I'd do it, but my current computer has issues with uploading several images and it ends up taking a long time. I don't know when I'll be able to get on a faster computer to do it so I decided to ask here. Here are the shields that need to be renamed:

• Image:I-87 (NYST).svg (upload it from Image:Interstate 87 (New York).svg)
• Image:I-88 (NYST).svg (upload it from Image:Interstate 88 (New York).svg)
• Image:I-190 (NYST).svg (upload it from Image:Interstate 190 (New York).svg)
• Image:I-290 (NYST).svg (upload it from Image:Interstate 290 (New York).svg)
• Image:I-390 (NYST).svg (upload it from Image:Interstate 390 (New York).svg)
• Image:I-490 (NYST).svg (upload it from Image:Interstate 490 (New York).svg)
• Image:I-590 (NYST).svg (upload it from Image:Interstate 590 (New York).svg)
• Image:I-690 (NYST).svg (upload it from Image:Interstate 690 (New York).svg)
• Image:I-790 (NYST).svg (upload it from Image:Interstate 790 (New York).svg)
• Image:I-890 (NYST).svg (upload it from Image:Interstate 890 (New York).svg)
• Image:I-990 (NYST).svg (upload it from Image:Interstate 990 (New York).svg)
• Image:I-295 (NYST).svg (upload it from Image:Interstate 295 (New York).svg)
• Image:I-695 (NYST).svg (upload it from Image:Interstate 695 (New York).svg)
• Image:I-895 (NYST).svg (upload it from Image:Interstate 895 (New York).svg)
• Image:I-587 (NYST).svg (upload it from Image:Interstate 587 (New York).svg)
• Image:I-678 (NYST).svg (upload it from Image:Interstate 678 (New York).svg)
• Image:I-787 (NYST).svg (upload it from Image:Interstate 787 (New York).svg)
• Image:I-478 (NYST).svg (upload it from Image:Interstate 478 (New York).svg)
• Image:I-481 (NYST).svg (upload it from Image:Interstate 481 (New York).svg)

-Jeff ^(talk) 02:32, 25 July 2008 (UTC)

Do New York Interstate Shields have the state name? Last time I made one I was told that they do not and it was replaced with a neutral shield. (SEE Image:I-687 (NY).svg file history) --Carpetmaster101 03:23, 25 July 2008 (UTC)

No, they don't, but neither do most in Maryland and Image:I-95 (MD).svg is a state-name shield. Since all states used state-name shields at some point, there is nothing wrong with uploading them. The convention is that the I-X (ST) shields are state-name shields, so if someone replaced all of the I-X (NY) shields with ordinary neutered shields, then they need to be changed back to state-name shields. If the I-X (NY) shields are actually some style specific to New York then New York's state-name shields should be moved to I-X (NYST) as Freewayguy suggested.-Jeff ^(talk) 16:15, 25 July 2008 (UTC)

I didnt uplaod those shileds, and those is upload a while ago. I think I-00 (XX).svg is a conventional name and is suitable usage. Commons is differ from Wikipedia so it does not have to be now. its okay to have it just as long as we do not use it on article. I plan to have Image:interstate XX (New York) delete one day because that name is too long,but the image as of Commons policy cannot be delete. new York I know do not use state-name shields now, neither does most Maryland and Minnesota.--Freewayguy ^{Call? Fish} 01:29, 29 July 2008 (UTC)

I do know New York does not use state-name shields. I even check on interstate-guide, NY is shade in black, and its list on bottom. Its okay to have those name as i-00 (NYST).svg just as long as we don't use it in article and we won't. I'm not the person who made those old shields, and those images cannot be delete as of Commons policy.--Freewayguy ^{Call? Fish} 01:55, 29 July 2008 (UTC)

Any other answers?--Freewayguy ^{Call? Fish} 18:06, 30 July 2008 (UTC)

Will anybody copy it?--Freewayguy ^{Call? Fish} 20:48, 31 July 2008 (UTC)

The rename request is on the images; just wait. --Admrb♉ltz (t • c • log) 21:04, 31 July 2008 (UTC)

NYST means New York State Thruway... --NE2 21:11, 31 July 2008 (UTC)

Anyway, does New York actually use the state name, or is this just more of Freewayguy's usual? --NE2 22:15, 31 July 2008 (UTC)

They don't. --Admrb♉ltz (t • c • log) 22:19, 31 July 2008 (UTC)

• But the renaming request on Commons is taking forever. I don't know how much longer it will take to process.--Freewayguy ^{Call? Fish} 22:30, 31 July 2008 (UTC)

• • New York don't. was uploaded a while ago. It was not uploaded or requested by me. See the interstate-guide have a map. New York is shaded in black, meaning it uses neutral shields. It is also listed on the bottom, of states have few state-named shields. Commons is different from Wikipedia, and its not an encyclopedia, deleting it because New York no longer specifies state-named shields isnot a good reason.--Freewayguy ^{Call? Fish} 22:46, 31 July 2008 (UTC)

If New York doesn't use state name shields, why does it matter what those shields are called? --NE2 23:10, 31 July 2008 (UTC)

People like me prefers typing I-90 (NYS).svg rather than Interstate 90 (New York).svg.--Freewayguy ^{Call? Fish} 23:37, 31 July 2008 (UTC)

Typing it for what? These shouldn't be used in articles. --NE2 01:20, 1 August 2008 (UTC)

If I want it to use it on my sandbox, or on anywhere in my namespace, I prefer typing Image:I-190 (NYS).svg; Maryland does not use state-named shields either, but the shields we have is Image:I-95 (MD).svg. They shouldn't be used on articles anyways, but the agreement is those shields can be used in history sections ex. of I-70, I-95, and I-97, because the state-named shields is still used on those highways alot.--Freewayguy ^{Call? Fish} 03:48, 2 August 2008 (UTC)

It's not worth moving them to a confusing name for simply for your user space and possibly one article use. --NE2 05:25, 2 August 2008 (UTC)

 Done It's all done. All the I-00 (NY).svg moved to I-00 (long).svg; all the Interstate 00 (New York).svg moved to I-00 (NY).svg.--Freewayguy ^{Call? Fish} 03:53, 8 August 2008 (UTC)

Kentucky Highway 531 and Mississippi Highway 531

I would like the shields for these two highways to use on List of highways numbered 531. For Kentucky, see Image:Elongated circle 535.svg for the template and upload the image at this link. For Mississippi, see Image:Circle sign 554.svg for the template and upload the image at this link. --CG was here. (T - C - S - E) 14:21, 25 July 2008 (UTC)

 Done and --Fredddie (talk) 22:39, 25 July 2008 (UTC)

California Speed Limit signs

Moved from the talk page by --Admrb♉ltz (t • c • log) There are several signs out there with the words "Maximum Speed" instead of "Speed Limit", most notably "Maximum Speed 55", "Maximum Speed 65" and "Maximum Speed 70". These should be added. —Preceding unsigned comment added by 76.87.52.179 (talk) 04:30, 1 August 2008 (UTC)

Added for what purpose? --NE2 06:19, 1 August 2008 (UTC)

 Not done -- IP does not seem to be watching this, ignoring request --Admrb♉ltz (t • c • log) 03:36, 6 August 2008 (UTC)

How is this? Never saw one. Image:Maximum Speed 55 sign.svg I have been busy working on exit lists for NJ state highways.Carpetmaster101 04:23, 6 August 2008 (UTC)

Interstate 85, Interstate 20, Interstate 285, Interstate 75, Interstate 59, Interstate 16 and Georgia S.R. 400

• I-85Interstate 85 (with state name "Georgia") Interstate 85
• I-20Interstate 20 (with state name "Georgia") Interstate 20
• I-285Interstate 285 (with state name "Georgia") Interstate 285
• I-75Interstate 75 (with state name "Georgia") Interstate 75
• I-59Interstate 59 (with state name "Georgia") Interstate 59
• I-16Interstate 16 (with state name "Georgia") Interstate 16
• SR 400 TollGeorgia State Route 400 (with "TOLL") Georgia State Route 400

Aws06828 (talk) 21:24, 8 August 2008 (UTC)Aws06828

Accepted --Fredddie (talk) 21:48, 8 August 2008 (UTC)

 Done --Fredddie (talk) 23:17, 8 August 2008 (UTC)

- Simply excellent! Thanks! - How did you do this? (what program) - I would like to be able to create some of my own. Aws06828 (talk) 21:17, 9 August 2008 (UTC)Aws06828

Tooele County Routes 1 & 2

I am requesting standard county route shields for Tooele County, Utah routes 1 and 2. Articles are not yet created, ubt they are historical county routes that were formed at the formation of I-80 in Utah. --Admrb♉ltz (t • c • log) 22:30, 11 August 2008 (UTC)

Accept Carpetmaster101 00:44, 12 August 2008 (UTC)

Done Carpetmaster101 01:19, 12 August 2008 (UTC)

US 190 (Acadiana Trail)

US 190 with "Acadiana" on the top and "Trail" on the bottom US 190 Aws06828 (talk) 01:27, 12 August 2008 (UTC)Aws06828

Why? Is this used on the road? --NE2 01:39, 12 August 2008 (UTC)

Yes - US 190 is designated as the "Acadiana Trail" from Baton Rouge, LA to Lake Charles, LA Aws06828 (talk) 01:24, 13 August 2008 (UTC)Aws06828

Accept Carpetmaster101 01:36, 13 August 2008 (UTC)

But are there signs that have "Acadiana Trail" on them? --NE2 03:17, 13 August 2008 (UTC)

Spacing of the (big) shields

The numbers in the shields on Image:I-80 (big).svg, Image:I-90 (big).svg, Image:I-605 (big).svg, and Image:I-705 (big).svg are spaced too widely (the latter two should also be in series C font). I've provided links for all but one interstate (I-605 is only proposed) but I hope these give you a good estimate on how to space these. For I-80: [8] [9], for I-90: [10] [11], and for I-705: [12]. Thanks for whoever will waste their time on this silly spacing problem :) CL — 19:32, 15 August 2008 (UTC)

Done, and it was a good waste of time indeed ;] Luokou (talk) 02:36, 16 August 2008 (UTC)

zOMG it's great! You have truly inspired me to do something, though that something hasn't been decided yet (probably create an article ). In all my zealousness, I forgot to request the same spacing fix for Image:I-70 (big).svg and Image:I-86 (big).svg; I hope an image isn't necessary in this case though. If it is just holler - CL — 02:50, 16 August 2008 (UTC)

Arkansas shields

Requesting shields for Arkansas Highways 288 and 393 for the junction list on Arkansas Highway 109 please. Many thanks in advance. -- Kéiryn (talk) 04:54, 25 August 2008 (UTC)

 Done! —Mr. Matté (^Talk/_Contrib) 13:19, 25 August 2008 (UTC)

Many thanks in hindsight! :-P -- Kéiryn (talk) 13:21, 25 August 2008 (UTC)

Monmouth County shield

I would like to request a missing Monmouth County, New Jersey shield:

• Image:Monmouth County Route 9 NJ.svg Dough4872 (talk) 01:43, 7 September 2008 (UTC)

 Done

Thanks Dough4872 (talk) 02:17, 19 September 2008 (UTC)

Here are some more shields I would like to request:

• Image:Monmouth County Route 3A NJ.svg
• Image:Monmouth County Route 4A NJ.svg
• Image:Monmouth County Route 37 NJ.svg
• Image:Monmouth County Route 44 NJ.svg

Dough4872 (talk) 02:17, 19 September 2008 (UTC)

Accept -- Carpetmaster101 23:16, 19 September 2008 (UTC)

 Done -- Carpetmaster101 23:53, 19 September 2008 (UTC)

Thanks I have another shield for Monmouth County I would like to request:

• Image:Monmouth County Route 28A NJ.svg

Dough4872 (talk) 16:41, 21 September 2008 (UTC)

 Done -- Carpetmaster101 16:11, 18 October 2008 (UTC)

Shield for Arkansas Highway 980

Needing shield for Arkansas Highway 980

The posted shield is incorrect, but a correct one can be found at http://www.flickr.com/photos/us_71/2938621405/

US 71 (talk) 13:52, 14 October 2008 (UTC)

•  Done Luokou (talk) 09:29, 17 October 2008 (UTC)

Very good. Thank you! US 71 (talk) 04:04, 20 October 2008 (UTC)

New requests

I just thought of some others, if they're not over the limit;

• List of county roads in Alachua County, Florida
  • Alachua CR's 329, 346A, and 1471. These aren't part of the new lists. I still have to finish those. ----DanTD (talk) 04:03, 26 September 2008 (UTC)

 Done, Sorry about the wait

Thanks, but not quite. A bot kept them from being converted by hiding them. ----DanTD (talk) 05:22, 30 November 2008 (UTC)

::NOTE: Only the ones on the Sumter County list were fixed. ----DanTD (talk) 05:25, 30 November 2008 (UTC)

UPDATE: I tried purging the pages, and so far it works on every article except the Columbia County list. ----DanTD (talk) 05:43, 30 November 2008 (UTC)

Now they should be working, I mispelled road when uploading them -- Carpetmaster101 01:29, 1 December 2008 (UTC)

Columbia County is fixed, but Gilchrist isn't. In the case of Columbia, I added one other CR shield link after I made the requests. I'm going to make some more requests another time, because I don't want to break the 10-shield limit. ----DanTD (talk) 18:05, 1 December 2008 (UTC)

I think that they are all up and running, the gilchrist had the same problem and I made the CR 6. -- Carpetmaster101 23:56, 1 December 2008 (UTC)

Thanks. I'll take care of the other requests in a new section. ----DanTD (talk) 00:03, 2 December 2008 (UTC)

DETOUR sign

I would like a svg version of Image:Detour sign.JPG at Image:Detour plate.svg. Thanks! ~~ This page was edited by ĈĠ 21:20, 25 October 2008 (UTC)

Is something like this what you want? —Mr. Matté (^Talk/_Contrib) 16:11, 26 October 2008 (UTC)

When this request is fulfilled the old image needs to be taken to IfD. —Scott5114↗ [EXACT CHANGE ONLY] 20:54, 26 October 2008 (UTC)

Perfect. Just need it in SVG, so I can use it on Image:WA-531 detour.png. ~~ This page was edited by ĈĠ 21:15, 26 October 2008 (UTC)

 Done! —Mr. Matté (^Talk/_Contrib) 02:15, 27 October 2008 (UTC)

Thanks! ~~ This page was edited by ĈĠ 22:03, 28 October 2008 (UTC)

Missing Monmouth County shield

I would like to request the following missing shield:

• Image:Monmouth County Route 23A NJ.svg Dough4872 (talk) 19:52, 19 November 2008 (UTC)

Accept -- Carpetmaster101 05:04, 30 November 2008 (UTC)

 Done -- Carpetmaster101 23:53, 1 December 2008 (UTC)

Thanks Dough4872 (talk) 02:55, 4 December 2008 (UTC)

Missing Cumberland County shield

I would like to request the follwing missing shield:

• Image:Cumberland County Route 733 NJ.svg Dough4872 (talk) 19:01, 28 November 2008 (UTC)

Accept -- Carpetmaster101 05:04, 30 November 2008 (UTC)

 Done -- Carpetmaster101 23:54, 1 December 2008 (UTC)

Thanks Dough4872 (talk) 02:55, 4 December 2008 (UTC)

Early round of Florida CR shields

I was going to wait until I got done with other new County Road lists in Florida, but I changed my mind and decided to request them anyway. They're all for the existing County Road lists in the follwing Counties;

Wakulla County

• Wakulla CR 299

Gilchrist County

• Gilchrist CR 341

Columbia County

• Columbia CR 133, 133B, 241, 246, and 1219

Sumter County

• Sumter CR 243D, and 243F

When I start those other County Road lists, I'll request the shields for them. ----DanTD (talk) 22:55, 19 September 2008 (UTC)

Accept -- Carpetmaster101 23:37, 19 September 2008 (UTC)

 Done -- Carpetmaster101