Road signs in Puerto Rico

From Wikipedia, the free encyclopedia

Map showing state adoption of the 2009 edition of the Manual on Uniform Traffic Control Devices:
  Adopted national MUTCD
  Adopted national MUTCD with state supplement
  Adopted state-specific MUTCD

Road signs in Puerto Rico are regulated in the Manual de Rotulación para las Vías Públicas de Puerto Rico, Puerto Rico’s supplement to the Manual on Uniform Traffic Control Devices (MUTCD), the standard for road signs, signals, and markings in the United States. It is developed by the Puerto Rico Highways and Transportation Authority (PRHTA) "in substantial conformance to" the national MUTCD developed by the Federal Highway Administration.

The first edition of the Manual de Rotulación para las Vías Públicas de Puerto Rico was published in 1979. This manual was most recently updated in 2020.[1] Puerto Rico is among the territories of the United States to have adopted the national MUTCD in conjunction with a supplemental volume.[2] The inscriptions on road signs are written in Spanish since it is an official language of Puerto Rico and is most widely spoken in Puerto Rico.[3]

The suffix (D) in parentheses means "right", from Spanish derecha, while the (I) in parentheses means "left", from Spanish izquierda.

Regulatory signs[edit]

Regulatory signs give instructions to motorists, pedestrians, and cyclists. Signs including Stop, Yield, No Turns, No Trucks, No Parking, No Stopping, Minimum Speed, Right Turn Only, Do Not Enter, Weight Limit, and Speed Limit are considered regulatory signs. Some have special shapes, such as the octagon for the Stop sign.

R1 series: Stop and yield[edit]

The MUTCD's R1 series is for Stop and Yield. Although the 4-WAY plaque (R1-3) was deprecated in the 2009 Edition of the MUTCD in favor of the ALL WAY plaque (R1-3P), the 4-VIAS plaque (R1-3) is still used in Puerto Rico.

R2 series: Speed limit[edit]

The MUTCD's R2 series is for speed limit signs. Speed limits in the United States are always in miles per hour.

R3 series: Lane usage and turns[edit]

The MUTCD's R3 series of signs is for lane usage and turn signs.

R4 series: Regulation of movement[edit]

The MUTCD's R4 series of signs is for the regulation of movement signs.

R5 series: Exclusionary[edit]

The MUTCD's R5 series of signs is for exclusionary signs. The most common of these signs is the do not enter sign.

R6 series: One way and divided highway[edit]

The MUTCD's R6 series of signs is for one way and divided highway signs. The most common of these signs is the One way (Transito) sign.

R7 series: Parking[edit]

The MUTCD allows for three types of parking signs: permissive, No Parking, and No Standing. However, in most states, there is an additional more restrictive one, No Stopping. These signs are found in the R7 series of signs in the MUTCD. Permissive parking signs allow for parking for either an unlimited or varied amount of time. They are often used in conjunction with parking meters and parking permits. They are specified by the MUTCD to be green on white. Local variations occur with additional information and slightly different designs. No Parking signs indicate that loading or unloading while temporarily stopped is permitted, but the driver must not leave the vicinity of the vehicle.[4] Some No Parking signs display time restrictions, while others are permanent restrictions. There are also temporary versions of the signs, often of similar design to the permanent ones. These signs are specified by the MUTCD to be red on white, although local variations occur. No Standing signs indicate that stopping temporarily to load or unload passengers is allowed, but vehicles cannot be stopped at the location for longer periods of time, even if the driver remains with the vehicle.[4] As with no parking signs, some restrictions displayed on the signs are permanent, and some are time-based.

R8 series: Parking and emergency restrictions[edit]

The MUTCD's R8 series of signs is for parking restriction and emergency restriction signs.

R9 series: Bicycles and pedestrians[edit]

The MUTCD's R9 series of signs is for bicycle and pedestrian signs.

R10 series: Traffic signal[edit]

The MUTCD's R10 series of signs is for traffic signal related signs.

R11 series: Road closed[edit]

The MUTCD's R11 series of signs is for road closure-related signs.

R12 series: Weight limits[edit]

The MUTCD's R12 series of signs is for weight limit-related signs.

R14 series: Truck routes[edit]

The MUTCD's R14 series of signs is for truck route-related signs.

R16 series: Seat belts and headlight use[edit]

The MUTCD's R16 series of signs is for seat belt and headlight use-related signs.

Warning signs[edit]

Warning signs are found in the W series of the national MUTCD. They highlight existing conditions, such as a curve, school, dead end street, or traffic signal. They can also warn of possible danger such as bumps, bicycles, low flying aircraft, or emergency vehicles. They are either yellow or fluorescent yellow in color and, with a few exceptions, are usually diamond-shaped and sometimes have square or rectangular smaller signs or plaques associated with them. Most W series signs can also be found with orange backgrounds for temporary use in situations such as construction zones. Some of the temporary-use signs are for use only in temporary situations.

W1 series: Horizontal alignment[edit]

The MUTCD's W1 series of signs is for warning signs relating to horizontal alignment.

W2 series: Intersections[edit]

The MUTCD's W2 series of signs is for warning signs relating to intersections.

W3 series: Advance traffic control[edit]

The MUTCD's W3 series of signs is for warning signs relating to advance traffic controls. The MUTCD provides options for graphic and text signs.

W4 series: Lanes and merges[edit]

The MUTCD's W4 series of signs is for warning signs relating to lane merges and added lanes, as well as lane endings.

W5 series: Road width restrictions[edit]

The MUTCD's W5 series of signs is for warning signs relating to road width restrictions.

W6 series: Divided highway[edit]

The MUTCD's W6 series of signs is for warning signs relating to divided highways.

W7 series: Hills[edit]

The MUTCD's W7 series of signs is for warning signs relating to hills.

W8 series: Pavement and roadway conditions[edit]

The MUTCD's W8 series of signs is for warning signs relating to pavement and roadway conditions.

W9 series: Lane transitions[edit]

The MUTCD's W9 series of signs is for warning signs relating to lane transitions.

W11 series: Advance warnings[edit]

The MUTCD's W11 series of signs is for warning signs relating to advance warnings. The MUTCD allows use of a fluorescent yellow-green background color for signs relating to non-motorized vehicles crossing the road.[5]

W12 series: Low Clearance Warnings[edit]

The MUTCD's W12 series of signs is for warning signs relating to low clearance.

W13 series: Advisory speeds[edit]

The MUTCD's W13 series of signs is for warning signs relating to advisory speeds. Speed limits in the United States are always in miles per hour.

W14 series: Dead end streets and no passing zones[edit]

The MUTCD's W14 series of signs is for warning signs relating to dead-end streets and no-passing zones. As all situations are not covered, several states and local governments have additional signs for other types of situations not covered by the MUTCD.

W15 series: Playgrounds[edit]

The MUTCD's W15 series of signs is for warning signs relating to playgrounds.

W16 series: Supplemental plaques[edit]

The MUTCD's W16 series of signs is for supplemental plaques for warning signs.

W17 series: Speed humps[edit]

The MUTCD's W17 series of signs is for warnings relating to speed humps.

Guide signs[edit]

Guide signs include highway route markers (shields), which are reassurance markers, interchange signs, including advance guide and exit signs, and mile markers. Advance guide and exit signs usually feature control cities or other locations to help direct drivers toward their destinations. The position of the exit number plaque indicates right or left exit[6] (and should indicate center lane exit).

School zone signs[edit]

The S series of signs are specially designated by the MUTCD for use around schools. Some states have additional school warning-related signs in the S series, the W series of warning signs, and/or the R series of regulatory signs of the state supplement or state MUTCD. As of 2009 the MUTCD requires school warning signs to have fluorescent yellow-green backgrounds.[7]

Bicycle signs[edit]

References[edit]

  1. ^ "Manual de Rotulación para las Vías Públicas de Puerto Rico" (PDF). act.dtop.pr.gov. San Juan: Puerto Rico Highways and Transportation Authority. 2020.
  2. ^ "MUTCDs & Traffic Control Devices Information by State". Manual on Uniform Traffic Control Devices. Federal Highway Administration. July 14, 2020. Retrieved January 11, 2021.
  3. ^ "Driving and Traffic in Puerto Rico". www.puertoricodaytrips.com. Retrieved January 13, 2024.
  4. ^ a b Staff (October 2011). "Chapter 7: Parallel Parking". Driver's Manual and Study Guide. New York State Department of Motor Vehicles. Retrieved March 16, 2012.
  5. ^ "2009 Edition Part 2 Figure 2C-11. Non-Vehicular Warning Signs". Manual on Uniform Traffic Control Devices. United States Department of Transportation. Retrieved June 6, 2012.
  6. ^ "MUTCD, Section 2E.28 - Interchange Exit Numbering" (PDF).
  7. ^ "2009 Edition Chapter 7B. School Signs". Manual on Uniform Traffic Control Devices. The United States Department of Transportation. Retrieved June 6, 2012.

External links[edit]