File:Phase Plots.svg

Summary[edit]

This svg file is made by Ugur Zongur using GNU Octave and Gnuplot in order to demonstrate linearity or non-linearity of phase plots of various filters.

These are the phase plots of:

a) FIR Filter (Type II) with impulse response: ${\displaystyle h[n]=\delta [n-3]+\delta [n-2]+\delta [n-1]+\delta [n]}$

b) FIR Filter (Type IV) with impulse response: ${\displaystyle h[n]=\delta [n-3]+\delta [n-2]-\delta [n-1]-\delta [n]}$

c) IIR Filter with impulse response: ${\displaystyle h[n]={{\delta [n-1]+2\delta [n]-3h[n-1]} \over {4}}}$

d) FIR Filter with impulse response: ${\displaystyle h[n]=4\delta [n-3]+3\delta [n-2]+2\delta [n-1]+\delta [n]}$

All plots are Arg[${\displaystyle H(e^{j\omega })}$] vs normalized ${\displaystyle \omega }$ with ${\displaystyle pi}$ .

GNU Octave and Gnuplot codes used to create the file is given below:

GNU Octave Code:

% Phase Demonstration of basic Filters
% Written By: Ugur Zongur

a=[1 1 1 1]; % Symmetrical (So this has got Linear Phase)
[pp_1,w] = freqz(a,1);

a=[1 1 -1 -1]; % Symmetrical (So this has got Linear Phase)
[pp_2,w] = freqz(a,1);

a=[1 2]; % Numerator
b=[3 4]; % Denominator
[pp_3,w] = freqz(a,b);

a=[4 3 2 1]; % Not Symmetrical (So this hasn't got Linear Phase)
[pp_4,w] = freqz(a,1);

data = [w/pi ; arg(pp_1); arg(pp_2); arg(pp_3); arg(pp_4)]';

save -ascii 'Phase_Plots.dat' data;

Gnuplot Code:

# set the output
set terminal svg
set output "Phase_Plots.svg"

# axis properties
set xrange [0:1]
set key off

# Set up a four-pane multiplot
set size 1, 1
set origin 0, 0
set multiplot

set title "a) FIR Filter (Type II) having Linear Phase"
set size 0.5,0.5
set origin 0 , 0.5
plot "Phase_Plots.dat" using 1:2 with lines linewidth 2

set title "b) FIR Filter (Type IV) having Linear Phase"
set size 0.5, 0.5
set origin 0.5 , 0.5
plot "Phase_Plots.dat" using 1:3 with lines linewidth 2

set title "c) IIR Filter having Non-Linear Phase"
set size 0.5, 0.5
set origin 0 , 0
plot "Phase_Plots.dat" using 1:4 with lines linewidth 2

set title "d) FIR Filter having Non-Linear Phase"
set size 0.5, 0.5
set origin 0.5 , 0
plot "Phase_Plots.dat" using 1:5 with lines linewidth 2

Licensing[edit]

I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide. If this is not legally possible: I grant any entity the right to use this work for any purpose, without any conditions, unless such conditions are required by law. PD Public domain false false

This file is a candidate to be copied to Wikimedia Commons. Any user may perform this transfer; refer to Wikipedia:Moving files to Commons for details. If this file has problems with attribution, copyright, or is otherwise ineligible for Commons, then remove this tag and DO NOT transfer it; repeat violators may be blocked from editing. Other Instructions Endorse this file for transfer by adding |human=<your username> to this Template. If this file is freely licensed, but otherwise unsuitable for Commons (e.g. out of Commons' scope, still copyrighted in the US), then replace this Template with {{Do not move to Commons|reason=<Why it can't be moved>}} If you think that a local copy of this file should be retained, then replace this Template with {{Keep local|reason=<Why a local copy is needed>}} Please ensure that the file has a properly descriptive and unambiguous name before transferring; see Wikipedia:File mover#What files should be renamed? for details.

This file was suggested for transfer by a bot (User:Fbot). Please verify that this file is suitable for Commons before transferring it.